The red LED has four modes of operation:

Standby Condition: The red LED will flash every 30-40 seconds to indicate that the smoke alarm is operating properly.

Alarm Condition: When the alarm senses products of combustion and goes into alarm, the red LED will flash one flash per second. The flashing LED and pulsating alarm will continue until the air is cleared.

WHEN UNITS ARE INTERCONNECTED, only the red LED of the alarm which senses the smoke or is being tested (the originating unit) will flash. All other units in the interconnect system will sound an alarm but their red LED’s will NOT be flashing.

Alarm Memory: This smoke alarm is equipped with an alarm memory, which provides a visual indication when an alarm has been activated. The red LED will illuminate for about 1.5 seconds every 16 seconds to indicate the memory condition. The memory will remain activated until pushing the Test/Hush Button resets it. The memory will also reset if the battery voltage drops to 8 volts. In an inteconected installation only the memory of the originating alarm will be activated.

Hush® mode: The red LED will illuminate for 1.5 seconds every 8 seconds, indicating the smoke alarm is in the Hush® mode.

TESTING: Test by pushing the Test/Hush button on the cover and hold it down for a minimum of 5 seconds. This will sound the alarm if all the electronic cir- cuitry, horn and battery are working. In an interconnected installation all inter- connected alarms should sound when the test feature on any one of the inter- connected alarms is activated. If no alarm sounds, check the fuse or circuit breaker supplying power to the alarm circuit. If the alarm still does not sound, the unit has defective batteries or other failure. DO NOT use an open flame to test your alarm, you could damage the alarm or ignite combustible materials and start a structure fire.

TEST THE ALARM WEEKLY TO ENSURE PROPER OPERATION. Erratic or low sound coming from your alarm may indicate a defective alarm, and it should be returned for service (see Section 12).

Page 9 Page 11
Page 10
Image 10
Kidde i12060 manual Red LED has four modes of operation
Page 9 Page 11

i12060 specifications

The Kidde i12060 is a user-friendly, advanced smoke alarm that embodies safety and innovation in residential fire prevention. Designed to protect homes and families, it utilizes a variety of modern features and technologies to ensure early detection of smoke, providing crucial time for residents to escape in the event of a fire.

One of the main features of the Kidde i12060 is its 120V AC power source with a battery backup. This dual power option ensures that the alarm remains operational even during power outages, delivering peace of mind to homeowners. The backup battery can be easily replaced, ensuring the alarm's functionality is always maintained.

The unit is equipped with a photoelectric sensor, which is particularly effective at detecting smoldering fires that might produce more smoke than heat. Unlike traditional ionization detectors, photoelectric sensors reduce false alarms caused by cooking or other non-threatening activities. This technology is critical for maintaining a hassle-free living environment while still ensuring optimum safety.

Another standout feature is the Smart Hush™ technology, which allows users to temporarily silence the alarm in the event of a non-emergency situation, such as a false alarm triggered by steam or cooking smoke. This reduces the likelihood of disruption while still allowing the alarm to maintain its readiness.

The Kidde i12060 also incorporates a loud 85-decibel alarm, which is designed to alert everyone in the household, even those who may be hard of hearing. The alarm can easily be mounted on walls or ceilings, facilitating flexible installation based on the layout of the home.

Additionally, the smoke alarm comes with a test/reset button that enables users to quickly check the unit's functionality and reset it after an alarm or false alarm situation. The LED indicator light provides a visual cue of the alarm’s status, ensuring users are well-informed about its condition.

With its sleek design, the Kidde i12060 complements various home aesthetics while prioritizing safety and reliability. The device is UL-listed, ensuring it meets rigorous safety standards set by Underwriters Laboratories, which is essential for consumer confidence.

In summary, the Kidde i12060 smoke alarm merges effective detection technologies with user-friendly features, making it an essential component of any home safety plan. Featuring a reliable power source, advanced sensor technology, and intuitive functions, it stands out as a trusted device for protecting families from fire hazards.
Top Page Image Contents