Operating and Installation Instructions
•This alarm is interconnect compatible with the following alarms and accessories:
–Smoke alarms: 1235, 1275, 1276, 1285, 1296, i12020, i12040, i12060, i12080, PE120, PI2000,
–Heat alarm: HD135°F
–CO alarms:
–Relay modules: 120X, SM120X, CO120X
–Strobe Light: SL177i
See User’s Guides for specific application information.
•For more information about compatible interconnect units and their functionality in an interconnect system, visit our web site at www.kidde.com.
HUSH® Control Feature
The HUSH® feature has the capability of temporarily desen- sitizing the smoke alarm circuit for approximately 10 min- utes. This feature is to be used only when a known alarm condition, such as smoke from cooking, activates the alarm. You can put your Smoke/CO Alarm in HUSH® mode by pushing the test/reset button. If the smoke is not too dense, the alarm will silence immediately, the unit will verbally announce “HUSH MODE ACTIVATED”, and the green LED will flash every 2 seconds for approximately 10 minutes. This indicates that the smoke alarm is in a temporarily desensitized condition. Your Smoke/CO Alarm will automat- ically reset after approximately 10 minutes. When the unit returns to normal operation after being in HUSH® mode, it will verbally announce “HUSH MODE CANCELLED”, and sound the alarm if smoke is still present. The HUSH® fea- ture can be used repeatedly until the air has been cleared of the condition causing the alarm. While the unit is in HUSH® mode, pushing the test/reset button on the alarm will also end the HUSH® period.
15
