Quick Set Up
Remove the three enclosed AA batteries and install them into the battery well. Carefully place the red battery warning flags into the battery well. Observe the battery polarity markings at the bottom of the battery well. After approximately 30 seconds, your CO alarm will begin monitoring for CO.
Your Kidde CO Alarm is now operational.
Installation Instructions
Installation Location
When choosing your installation locations, make sure you can hear the alarm from all sleeping areas. If you install only one carbon monoxide alarm in your home, install the alarm near bedrooms, not in the basement or furnace room.
Recommended Locations
Upper Levels of Home
DINING KITCHEN BEDROOM BEDROOM
LIVING ROOM | BEDROOM |
Basement Levels of Home
FURNACE |
ROOM |
•If you have only one alarm, place it near sleeping areas.
•Position near fuel burning appliances, near fireplaces, furnace or hot water heater.
6 | 7 |