Operating/Installation Instructions
Drill a hole through the pencil marks and use the enclosed screws and anchors to secure (use 3/16”drill bit for anchor holes).Align the Smoke/CO Alarm with the mounting plate and rotate clockwise (right) until the unit is aligned. Screw and anchor accessories are supplied.
Operating/Installation Instructions
D.Tamper Resist Feature:
To make your smoke alarm somewhat tamper resistant, a tamper resist feature has been provided. Activate the tamper resist feature by breaking off the four posts in the square holes in the trim ring (see Figure A). When the posts are broken off, the tamper resist tab on the base is allowed to engage the mounting bracket. Rotate the alarm onto the mounting bracket until you hear the tamper resist tab snap into place, locking the alarm on the mounting bracket. Using the tamper resist feature will deter children and others from removing the alarm from bracket. NOTE: To remove the alarm when the tamper resist tab is engaged, press down on the tamper resist tab, and rotate the alarm off of the bracket (see Figure B).
FIGURE A
AA
Posts
FIGURE B
14 | 15 |
