I n s t a l l a t i o n
10 cm (4”)
MINIMUM
CEILING
BEST | NEVER HERE |
PLACEMENT |
|
ACCEPTABLE
PLACEMENT
SIDE WALL
IMAGE 2A
NOT IN
THIS AREA
10 cm (4”)
BEST
ANYWHERE IN
THIS AREA
0.9 m (3’) | 0.9 m (3’) |
HORIZONTAL DISTANCE FROM PEAK
IMAGE 2B
I n s t a l l a t i o n
Mounting
CAUTION: This unit is sealed. The cover is not removable!
NOTE: Any statements referring to a battery, applies to both batteries used with model 0918CA.
NOTE: Any statements referring to a battery reminder tab, applies to both battery reminder tabs used with model 0918CA.
•Remove the mounting plate from the back of the alarm by holding the plate and twisting the alarm in the direction indicated by the “OFF” arrow on the alarm cover.
•To ensure aesthetic alignment of the alarm with the
•Secure the mounting plate to the wall or ceiling with the anchors and screws provided (Image 3B).
•For aesthetic reasons, the suggested position for wall mounting is with the button(s) facing down (Image 3C).
•Press the battery reminder tab down into the battery compartment while inserting the battery (Image 3E).
CAUTION: If the battery reminder tab is not held down in the battery compartment by the battery, the battery door will not close and the unit will not attach to the mounting plate.
•Alignment marks are provided on the edge of the mounting plate and the alarm. After installing the mounting plate, place the alarm onto the mounting plate, making sure the alignment marks are lined up. Twist the alarm in the direction indicated by the “ON” arrow on the alarm cover (Image 3D) until it locks in place.
5 | 6 |
