Installation

Mobile Homes

Modern mobile homes have been designed to be energy efficient. Install smoke alarms as recommended in Recommended Locations and Image 2A.

In older mobile homes that are not well-insulated compared to present standards, extreme heat or cold can be transferred from the outside to the inside through poorly insulated walls and roof. This may create a thermal barrier that can prevent the smoke from reaching an alarm mounted on the ceiling. In such units, install the smoke alarm on an inside wall with the top edge of the alarm at a minimum of 10 cm (4") and a maximum of 30.5 cm (12") below the ceiling (Image 2A).

If you are not sure about the insulation in your mobile home, or if you notice that the outer walls and ceiling are either hot or cold, install the alarm on an inside wall. For minimum protection, install at least one alarm close to the bedrooms. For additional protection, see Image 1A.

WARNING: Test your smoke alarm operation after R.V. or mobile home vehicle has been in storage, before each trip and at least once a week during use.

Wiring Requirements

•This smoke alarm should be installed on a CSA listed or recognized junction box. All connections should be made by a qualified electrician and all wiring used shall be in accordance with articles 210 and 300.3(B) of the U.S. National Electrical Code ANSI/NFPA 70, NFPA 72 and/or any other codes having jurisdiction in your area. The multiple station interconnect wiring must be run in the same raceway or cable as the AC power wiring to the alarms. In addition, the resistance of the interconnect wiring shall be a maximum of 10 ohms.

•The appropriate power source is 120 Volt AC Single Phase supplied from a non-switchable circuit which is not protected by a ground fault interrupter.

•WARNING: The alarm should not be operated on power derived from a square wave, modified square wave or modified sine wave inverter. These power sources produce high peak voltages that will damage the alarm. These types of inverters are sometimes used to supply power to the structure in off grid installations, such as solar or wind derived power sources.

7

Page 7 Page 9
Page 8
Image 8
Kidde PI2000CA manual Mobile Homes, Wiring Requirements
Page 7 Page 9

PI2000CA specifications

The Kidde PI2000CA is a state-of-the-art smoke and carbon monoxide detector designed to provide comprehensive safety for your home or business. This versatile device integrates advanced technologies to detect both smoke and carbon monoxide, ensuring peace of mind for occupants.

One of the most notable features of the Kidde PI2000CA is its dual-sensor technology. The smoke detection system utilizes both photoelectric and ionization sensors. The photoelectric sensor is highly effective at detecting smoldering fires, which are often characterized by excessive smoke and slow burning. In contrast, the ionization sensor excels in identifying fast-flaming fires. This combination allows the PI2000CA to offer superior responsiveness, providing reliable alerts in various fire scenarios.

Another defining characteristic of the PI2000CA is its 10-year sealed lithium battery. This feature eliminates the hassle of battery replacements, ensuring that the unit remains functional and reliable throughout its lifespan. The sealed battery also enhances convenience, as users no longer need to worry about battery expiration dates or regular checks.

The Kidde PI2000CA is also equipped with a voice alarm feature. In addition to standard visual alerts, the device announces the type of danger detected: "Fire" or "Warning: Carbon Monoxide." This auditory feature is particularly beneficial during nighttime or in situations where individuals may be disoriented, providing clear instructions that allow for quicker responses.

Furthermore, the smoke and carbon monoxide detector has a test/reset button, allowing users to regularly check the unit’s functionality. The device is designed to be user-friendly, making it easy for anyone to operate and maintain.

Another significant aspect of the Kidde PI2000CA is its user manual, which guides homeowners in optimal placement of the detector for effective coverage. Proper installation is crucial in maximizing the unit's performance, especially in larger spaces.

In summary, the Kidde PI2000CA combines innovative technology and user-centric features to offer enhanced safety for environments where smoke or carbon monoxide may pose risks. With its dual-sensor technology, long-lasting battery, voice alerts, and ease of maintenance, this device is a robust solution for smoke and CO detection, ensuring that families and individuals can feel safe in their homes.
Top Page Image Contents