King Kutter Free Floating Finishing Mower manual PTO Shafts Cover Removal Eurocardan Series

PTO SHAFTS COVER REMOVAL

EUROCARDAN SERIES 5

1). There are 2 black tabs around the cover as shown in (B in FIG. 1). Take a flat screwdriver and pry under the tabs one at a time at point (B in FIG. 2) lifting tab over on top of (e-shaped lock). After both tabs are released you can slide the locking ring down the shaft in direction of (C in FIG. 3). Then you will see a metal e-ring (E in FIG. 4) at point (D in FIG. 4) you must pry under ring and remove it, (it will just slide down shaft unless you take PTO apart) then apply pressure against cover (A in FIG. 1) in the direction of arrow and slide cover down shaft.

2)To put cover back into place slide cover back toward end, making sure cover and locking mechanism (F in FIG. 4) line up. Replace metal e-ring, slide the locking ring back into place, be sure the tabs lock securely over

locks.

NOTE: Cover may be longer on some models but, they will come off the same as above.

FIGURE- 1

FIGURE- 2

42 FIGURE-3

FIGURE-4