Kingston Technology 07-16-2009 manual SSDNow, For Desktops

SSDNow

For Desktops

BIOS does not have the spare SATA ports turned on or enabled. If this is the case do the following:

1)Restart your computer. While the system is restarting, activate the system setup program (BIOS) by repeatedly pressing a special key such as ESC, F1, F12 or DELETE. (Consult your computer system’s documentation for the correct key.)

2)While in the system BIOS, look for an entry labeled "Drives or Hard Drives." Select this field using the arrow keys on your keyboard and press Enter. Here, the spare SATA ports can be enabled or turned on by selecting the SATA port and changing the value to "On" or "Enabled". For best results, it is recommended that you enable or turn on all SATA ports during this process. Doing so will not harm your system.

3)Exit the BIOS by pressing the ESC key. Save changes when prompted.

4)Restart the computer, booting to the software CD, and try the cloning process again.

7.Select Automatic from the cloning mode options (Figure 6). DO NOT select Manual mode. (Manual mode should be used by advanced users only.) Click Next.

Figure 6: Cloning mode options

10