Device Usage (Mac Environment)
Once the DT4000 has been initialized, you can access the secure data partition and utilize the device options by logging into the device with your password. To do so, follow these steps:
1.Insert the DT4000 into a USB port on your notebook or desktop and enter your pass- word (see Figure 8.1.)
2.Once you’ve typed your password, click the ‘Login’ button to continue.
•If the correct password is entered, the DT4000 will unlock and you can begin using the device.
• If an incorrect password is entered, an error message will appear just below the ‘Hint’ field, indicating a login failure (see Figure 8.2.)
Figure 8.1 – Login Window
(NOTE: During the login process, if a bad password is entered, you will be given another opportunity to enter the correct password; however, there is a
3.You may unlock the secure data partition in
If you are currently logged in under
* Once you authenticate to the device successfully, the failed login counter will reset.
Document No. | DataTraveler® 4000 | Page 17 of 27 |