Setup (Windows Environment)
1.Insert the DT4000 into an available USB port on your notebook or desktop and wait for Windows to detect it.
•Windows XP users will receive a ‘Found New Hardware’ notification as seen in Figure 2.1.
•Windows Vista/7 users will receive a device driver notification as seen in Figure 2.2.
Once the new hardware detection is complete, Windows will prompt you to begin the initialization process.
•Windows XP users can skip step 2 and go to page 5 – Device Initialization.
•Windows Vista/7 users will see an AutoPlay window similar to the one in Figure 2.3.
2.Select the option ‘Run DT4000_Launcher.exe’.
If Windows does not AutoPlay, you can browse to the
Figure 2.1 – Found New Hardware
(Windows XP)
Figure 2.2 – Device Driver Installation
(Windows Vista/7)
Figure 2.3 – AutoPlay Window
(Windows Vista/7)
(Note: Menu options in the AutoPlay window may vary depending on what programs are currently installed on your computer. AutoRun will start the initialization process automatically.)
Figure 2.4 – DT4000 Contents
Document No. | DataTraveler® 4000 | Page 4 of 27 |