![](/images/new-backgrounds/1118052/11805221x1.webp)
6 | Hardware Installation |
Automatic Partitioning / Reconnection
If any of the ports on the Fast EtheRx Hub experience excessive numbers of consecutive collisions, duration collisions, or faulty conditions, that particular port can be partitioned. Once partitioned, the hub will continue to monitor that port. If the error conditions have been corrected or a good data packet is transmitted without incurring a collision, the hub will automatically reconnect that port to the network.
Hardware Installation
Before you begin installing network cables, please take a few moments to familiarize yourself with the front panel of your Fast EtheRx Hub. The functions on the front and rear panels are illustrated below.
Front Panel
Fiber Module Detection LED Utilization LEDs | |
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | ||
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| Class II | Repeater |
Stackable 100BASE - TX |
|
|
|
|
|
|
|
|
|
|
|
|
|
Fast Ethernet Hub |
|
|
|
|
|
|
|
|
|
|
|
|
|
KNE24TX/RS |
|
|
|
|
|
|
|
|
|
|
| 24 |
|
13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 |
|
Power LED |
| Link / Activity / Partition LEDs |
|
|
Collision LED |
| Uplink Ports | ||
|
|
|
|
Fig. 1. Front Panel - 24-Port Model
Power LED
The green LED indicates the power status. The LED will light when the AC power cord is connected from a power source to the hub and the power switch is turned on.
Collision LED
The amber LED displays the collision status. If a collision is detected on the network, the amber LED will flash. For the Fast Ethernet CSMA/CD network, collisions can be quite common. A collision occurs when two or more stations try to transmit data simultaneously. Both stations will stop transmitting and then
Fiber Module Detection LED
The Fiber Module Detection LED will light up if the optional 100FX module is installed. This LED will not light up if the optional 100FX module is not installed.
Kingston Technology Company | KNE24TX/RS User’s Guide - Rev. A01 |