MAINTENANCE OF MOTORS
The motors used on the fan and the drum assembly are prelubricated for extended bearing life and require no further lubrication. However, periodic cleaning/vacuuming of the fan/heater is recommended.
Make sure that the power is turned off before proceeding.
CLEANING BRASS TRIM
Clean the brass trim using a soft cloth, slightly dampened with lemon oil and buff with a clean soft cloth. Do NOT use brass polish or household cleaners as these products will damage the brass trim. Lemon oil can be obtained at supermarkets or hardware stores.
ELECTRIC DIAGRAM
Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance with national and local codes
If repairing or replacing any electrical component or wiring the original wire routing, colour coding and securing locations must be followed.
FAN
MOTOR
10
HEATER ELEMENT
DRUM
MOTOR |
|
8 | 9 |
2 |
|
11 | 11 |
| |
| 1 BLACK |
12 | 2 WHITE |
3 |
|
| BLACK | POTENIOMETER |
RED |
|
SPEED CONTROL
DIMMER
10003167
4
5
CFM Majectic Factory Wire Req'd
2.Motor Variable Speed (12V/DC)
3.potentiometer
4.Speed Control
5.Dimmer Switch Rotary
6.Thermostat
7.On / Off Switch
8.Light Socket
9.Light Bulb
10.Fan/Heater
11.Nylon Cable Tie
12.Grommet 7/8
9 RED
10 BLACK
11 YELLOW
7 BLACK
8 WHITE
9
8 11
3BLACK
4WHITE
8
12
5 BLACK
6 WHITE
14 WHITE
6WHITE
5 BLACK
8 RED
13 BLACK
7
THERMO STAT
6
8 WHITE
11 YELLOW
Wiring Colour Code:
WH = | White |
BL = | Black |
RE = | Red |
- 8 -
11
14
13
