11 Check in the operating manual of the television
whether additional settings must be configured on
the television.
ÔOn this topic, also refer to Section 9.5. "Configuring
the Video Output/ TV Mode".
7.5. Connecting the DVD Player to a
Video Projector
You can also connect the DVD player to a video pro-
jector instead of a television.Check the operating
manual of the video projector to determine which of
the described connection options are available.Any
additional cables required can be obtained from
audio/video stores.
8. Connecting Audio Compo-
nents to the DVD Player
Instead of the television speakers,the sound can also be
played back by external audio components.To accom-
plish this,HiFi systems, Dolby Digital/DTS receivers or
surround sound systems can be connected to the DVD
player.You have the following options here:
8.1. Connecting a HiFi System to the
DVD Player
Before connecting,check in the operating manual of
the HiFi system …
Úwhether the HiFi system is suitable for connection
to a DVD player.
Úwhether the HiFi system has RCA sockets.If this is
the case,you can connect the HiFi system to the
DVD player with RCA cables.
ôNote:
If the audio/video RCA cable included with the DVD player
is already in use,you will need additional RCA cables.These
are available in audio/video stores.
To connect a HiFi system:
1Insert the white RCA cable plug into the RCA sok-
ket FL on the DVD player.
2Insert the second white RCA cable plug into the
RCA socket for the left channel on the HiFi
system.
3Insert the red RCA cable plug into the RCA
socket FR on the DVD player.
4Insert the second red RCA cable plug into the RCA socket
for the right channel on the HiFi system.
Fig. 7 Connecting a HiFi system via RCA cables
5Check in the operating manual of the HiFi system
whether additional settings are required for connec-
tion to a DVD player.
ôNote:
For optimal sound:Place the speakers of your HiFi
system to the left and right of the television.
If you have connected the DVD player to the television
with a Scart cable:The audio signals are transmitted to
the HiFi system over the RCA cables and to the televi-
sion over the Scart cable.In this case, set the volume of
the television to the lowest value.
8.2. Connecting Digital Audio Compo-
nents to the DVD Player
Digital audio components can be connected to the DVD play-
er either via digital or analog cables.
ôNote:
The cables required for the connection options described
below are available at audio/video stores.
8.2.1. Connecting via Digital Cable
Check in the operating manual of the digital audio
component whether it can be connected to the DVD
player …
Úvia a coaxial cable or
Úvia an optical cable
If both options are available,you can freely decide
which connection option you prefer.
8.2.1.1. Connecting via Coaxial Cable
1Insert the plug of the coaxial cable into the coaxial
socket on the DVD player.
13
IB_DVD_KH6507_GB.qxd 19.10.2004 9:53 Uhr Seite 13