TCP/IP Printing (LPR/IPP/RAW): The MFP server supports the TCP/IP network protocol and LPR/IPP/RAW printing protocols. By default, these protocols are enabled.
5.4.2 Wireless
If you want to use the MFP server through a wireless LAN, set up the MFP server through Ethernet first and make sure your wireless LAN setting is correct. After setting the wireless LAN, unplug the Ethernet cable and restart the MFP server. Then you can start to use the MFP server through the wireless LAN. If the wireless configuration doesn’t work, plug in the Ethernet cable again,
You can enable/disable the wireless function and set up the wireless parameters
—including Function and ESSID — for the MFP server from here. You can manually set the wireless network that you want to connect on this screen or use the Site Survey screen to automatically search for an available wireless network and associate with it.
Function: Allows you to disable, enable or let the MFP server
The MFP server only can work in Ethernet or wireless LAN mode. It can’t work in both Ethernet and wireless LAN mode at the same time. When the MFP server starts up, it will
WEB MANAGEMENT | 33 |
|
