You can configure the MFP Server to automatically get an IP address from the DHCP server or manually specify a static IP address.
If you need the MFP server to automatically get an IP address from a DHCP server, select “Enable Obtain TCP/IP Settings Automatically (Use DHCP/ BOOTP).” You also can select “Disable Use the following TCP/IP Settings” to manually assign an IP address, subnet mask and gateway for the MFP server.
5.4.4 Save Settings
After configuring the MFP server, click “Save Settings” to save the settings and re- start the system.
5.5 System Tools
5.5.1 Load Default
You can use this screen to restore the factory default settings. NOTE: All of your previous setting will be cleared.
WEB MANAGEMENT | 37 |
|
