Appendix E Mounting Templates | 17 |
Appendix E Mounting Templates
The Fast EtheRx Switch can be stationed on a flat surface using the four rubber feet provided, or mounted in a standard 19” rack by using the mounting brackets and 4 thumb screws provided with the unit.
Rubber Feet for Desktops
The Fast EtheRx Switch comes with rubber feet that may be applied to the bottom of the unit for desktop surface installations. The 4 rubber feet have peel- off adhesive backing. Remove the backing and attach the feet to the bottom of the switch.
Brackets for Rack Mounting
The Fast EtheRx Switch can also be mounted in a standard 19” rack using the brackets included with the unit. A rack mount installation uses a standard 19” dimension. Align the holes in the brackets with the holes on each side of the unit. Use the 8 screws provided to secure the brackets to the Fast EtheRx Switch. See Figure
Fig. E-1-Attaching the Mounting Brackets
KNS1600/R User’s Guide - Rev. A00 | Kingston Technology Company |
