Dimensions for built-in area Personal Injury/Property
Damage Hazard
l
Unit is top-heavy and may tip
forward when the doors are
opened.
. A solid soffit or 2” wood block is
required above the refrigerator
to prevent tipping during use.
l
If solid soffit is more than 1 inch
above refrigerator, a wood bloc1
must be installed on the wall no
more than i/4 inch above the
refrigerator cover.
Failure to follow these instructions
could result in personal injury or
property damage.
Width and depth of the built-in area
are determined by the type of
installation. The built-in refrigerator
can be installed wilh the doors flush
with the wall, with the doors
protruding from the wall, or with side
panels enclosing refrigerator. Select
one method of installation and use
the dimensions givenfor that
method as shown.
Height of built-in area can range from
a minimum of 82-l/2” to 84-3/4”.
Optional top grilles may be required
for enclosures less than 83-98”.
Height dimensions with optional top
grilles are given on page 4.
+/- l/8” tolerance
*ounded electrical
01
let location
Wall
plumbing
location
/
t
10”
Floor plumbing
tBA
13”
location
5”
Dimensions for tipping product Electrical outlet
should be centered
within shaded area
can be cut anywhere
within shaded areas.
- Page 3