Level and Align Refrigerator

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT: All four leveling legs must contact the floor to support and stabilize the full weight of refrigerator. Rollers are for moving refrigerator and not for permanent support.

After moving the refrigerator to its final location:

1.Use a ⁵⁄₁₆" socket driver to turn the leveling bolts clockwise to extend the legs to the floor as shown. The rollers should be off the floor.

A B

C

¹⁄₄" (6 mm) max.

2" (5 cm)

D

A. Center board ¹⁄₄" (6.35 mm) max. above refrigerator

B. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards

C. Attach to studs with six #8 x 3" (7.6 cm) screws

D. Compressor cover

IMPORTANT: Adjust in small increments to keep from damaging the cabinet trim and causing problems with the door alignment or top grille fit. To avoid damage to the cabinet or leveling legs, do not apply more than 50 inch-pounds

(5.65 Nm) of torque to the leveling bolts. The leveling legs can be extended to a maximum of 1¹⁄₄" (3.18 cm) below the rollers.

4.For Classic and Overlay models, additional adjustments may be needed after the custom panels are installed.

A B

A

B

A. Rear leveling bolt

B. Front leveling bolt

2.Adjust the leveling legs to level and align the refrigerator from left to right and front to back so that the refrigerator is level and aligned with the cabinetry. The cabinetry surface must be plumb for the ideal fit of the refrigerator side trim.

3.Continue adjusting all of the leveling legs to raise the refrigerator until the top is within at least 1" (2.54 cm) of the top soffit.

NOTE: If an anti-tip board has been used, adjust the leveling legs until the top of the refrigerator is within ¹⁄₄" (6.35 mm) of the bottom of the anti-tip board as shown. Do not crush the compressor cover.

Install Classic Series Custom Panels

IMPORTANT: KitchenAid is not responsible for the removal or addition of molding or decorative panels that would not allow access to the refrigerator for service.

Door Panels

1.Remove all tape and door bracing from the refrigerator and freezer doors.

2.Remove the screws that attach the handles to the door frame.

3.Slide the decorative door panels into the door frames.

4.If needed, route the door panels or install a filler panel between the doors and the decorative panels. See the “Classic Series Custom Panels” section in “Installation Requirements.”

AA

A. Panels

22

Page 22
Image 22
KitchenAid 2316565C manual Level and Align Refrigerator, Install Classic Series Custom Panels, Door Panels

2316565C specifications

The KitchenAid 2316565C is a versatile and innovative blending tool designed for culinary enthusiasts who appreciate both quality and performance in their kitchen appliances. This model stands out due to its powerful motor and unique features that enhance the cooking experience.

One of the main features of the KitchenAid 2316565C is its robust 3.5 horsepower motor, which ensures efficient blending even with the toughest ingredients. Whether you're making smoothies, soups, or sauces, this blender can effortlessly handle ice and frozen fruits, delivering a smooth and consistent texture every time.

The unit's stainless-steel blades are engineered for durability and precision. Their unique design helps to create a vortex that pulls ingredients down toward the blades for even blending. This technology allows for superior blending performance, reducing the preparation time for various recipes.

The KitchenAid 2316565C also comes with a large capacity blending jar that accommodates up to 64 ounces. This generous size is perfect for family meals or entertaining guests, enabling you to blend large batches without needing to refill. Additionally, the jar features measurement markings, allowing for precise ingredient additions and recipe adjustments on the fly.

Another key feature of this blender is its intuitive control panel, which includes multiple speed settings and a pulse function. Users can easily customize blending speeds to achieve the desired consistency, whether it’s a silky smooth puree or a chunky salsa. The pulse function adds versatility, making it simple to chop or mix ingredients without over-blending.

Safety is a priority with the KitchenAid 2316565C. The blender includes a safety lock mechanism that prevents operation unless the lid is securely in place. This feature provides peace of mind, especially when blending hot ingredients, ensuring that spills and splatters are minimized.

Finally, the appliance's sleek and modern design seamlessly fits into any kitchen decor, while its easy-to-clean removable parts make it a practical choice for daily use. The blender is dishwasher-safe, allowing for hassle-free clean-up after meal prep.

In summary, the KitchenAid 2316565C is a powerful and efficient blender that combines performance, safety, and style. It is ideal for users seeking to elevate their culinary creations with ease, making it a worthy addition to any kitchen.