C h e c k i n g Y o u r V e n t
Venting (cont.)
4.Use the straightest path possible when routing the exhaust vent. Use the
fewest number of elbows and turns. Allow room when using elbows or making turns. Bend vent gradually to avoid kinking.
5.Use duct tape to seal all joints. Do not use screws to secure vent. Lint may catch on screws.
6.Clean exhaust vent periodically, depending on use, but at least every 2 years, or when installing your dryer in a new location.
•Disconnect vent from the dryer and clean one section at a time until you reach the exhaust hood.
•Use the hose attach- ment on your vacuum, or a pole or wire with a
feather duster or rag attached, to clean out lint.
•Be sure the flapper on the outside end of vent moves freely.
•When cleaning is complete, be sure to follow the Installation Instructions supplied with your dryer for final product check.
SURE CONNECTTM Vent Kit (optional)
For safe and easy installation of your dryer, a com- plete exhaust vent kit
To install vent:
is available. SURE CONNECT Vent Kit (No. 4396028) con- tains everything you need to install your dryer.
The kit contains:
2 - 4 ft. vent sections with attached close elbows
1 - Wall plate for close clearance installations
2 - 4 in. clamps
Wall |
Dryer |
Wall |
Dryer |
1. Clamp one elbow/vent section to the wall and one to the dryer
2.Extend the vent upward, almost to the top of the dryer, then push the dryer to the wall.
The SURE CONNECT Vent Kit (No. 4396028) can be ordered by calling
3.From over the top, snap the vent together.
7
