Electrical

requirements

Electrical Shock Hazard

l Electrical ground is required on this appliance.

l If cold water pipe is interrupted by plastic, non-metallic gaskets, or other insulating materials, Do Not use for grounding.

l Do Not ground to a gas pipe.

l Do Not have a fuse in the neutral or grounding circuit. A fuse in the neutral or grounding circuit could result in an electrical shock.

l Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded.

Failure to follow these in instructions could result in serious injury or death.

If codes permit and a separate grounding wire is used, it is recommended that a qualified electrician determine that the grounding path is adequate.

IMPORTANT:

Save Installation Instructions for electrical inspector’s use.

q A three-wire or four-wire, single A . phase, 240-volt, 60-Hz, AC-only

electrical supply is required on a separate, 40-ampere circuit, fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. The fuse size must not exceed the circuit rating of the appliance specified on the serial/rating plate located on the bottom of the cooktop.

u THE COOKTOP MUST BE

B CONNECTEDONLY. WITH COPPER WIRE

IIC Wire sizes and connections must

. conform to the requirements of the National Electrical Code ANSVNFPA

-latest edition**, and all local codes and ordinances.

Copies of the standards listed may be obtained from:

**National Fire Protection Association Batterymarch Park

Quincy, Massachusetts 02269

qD Wire sizes (COPPER WIRE ONLY) and connections must conform with the rating of the appliance (40

amperes). The appliance should be connected directly to the fused disconnect or circuit breaker box through flexible, armored or non- metallic sheathed, copper cable. The flexible, armored cable extending from the appliance should be connected directly to the junction box.

JELocate.Ithe junction box to allow as much slack as possible between junction box and the cooktop so that

the cooktop can be moved if servicing is ever necessary.

A U.L.-listed conduit connector must be provided at each end of the power supply cable (at the appliance and at

the junction box).

Electrical connection

This appliance is manufactured with a cabinet- connected, green or bare grounding wire. Connect the appliance cable to the junction box through the U.L.-listed conduit connector. Complete electrical connection according to local codes and ordinances.

 

Where local

codes permit

 

connecting

the frame-grounding

A n conductor

to the neutral (white)

17

junction

box

wire:

 

 

 

cable

from

 

 

power supply

red wires

white wire.

II

n\\

kb’ black wires

bare

or

\-

green

wire

U.L.-listed conduit I

 

 

 

 

connector

 

cable from cooktop

 

Grounded

neutral

 

Figure

1

1.Disconnect power supply.

2.Connect the flexible armored cable from the cooktop to the junction box using a U.L.-listed conduit connector. Tighten screws on conduit connector.

3.Connect the green (or bare) appliance cable wire with the neutral (white) wire in the junction box.

4.Connect the two black wires together; then connect the two red wires together.

(See Figure 1.)

Where local codes Do Not permit connecting the frame-grounding conductor to the neutral (white)

junction box wire:

cable from power supply

l

junction box

*k

white !vire

Tconnector

connector

cable from cooktop

Ungrounded neutral

Figure 2

1.Disconnect power supply.

2.Connect the flexible armored cable from the cooktop to the junction box using a U.L.-listed conduit connector. Tighten screws on conduit connector.

3.Connect the two black wires together; then connect the two red wires together.

(See Figure 2.)

4.Connect the green or bare grounding wire from the appliance cable to the grounded wire in the junction box.

5.Put a twist-on connector on end of white wire.

Panel B

Page 3
Image 3
KitchenAid 4366501 installation instructions Requirements, Grounded Neutral, Ungrounded neutral, Panel B

4366501 specifications

The KitchenAid 4366501 is a versatile and powerful stand mixer that has become a staple in many kitchens. Renowned for its robust design and exceptional performance, this kitchen appliance is perfect for anyone from novice home cooks to professional bakers.

One of the standout features of the KitchenAid 4366501 is its powerful motor. With a high-performance 325-watt motor, it provides ample power to handle a variety of tasks, from mixing dough and whipping cream to making batter and kneading bread. The mixer is built to endure heavy use, ensuring it can tackle even the most demanding recipes with ease.

The 4366501 also boasts a 10-speed slide control, which allows for precise speed adjustments to accommodate different mixing techniques. From slow stirring for delicate ingredients to high-speed mixing for vigorous tasks, users can achieve the perfect consistency for their recipes. This flexibility makes it an invaluable tool for preparing a wide array of dishes.

Another notable characteristic of the KitchenAid 4366501 is its generous 4.5-quart stainless steel mixing bowl. This bowl not only offers plenty of capacity for large batches but also features a comfortable handle for easy pouring and transferring. Its durable construction ensures resistance to chipping and tarnishing, making it a long-lasting addition to your kitchen.

The mixer comes with several essential attachments, including a flat beater, dough hook, and wire whip. These attachments make it suitable for various functions, such as mixing, kneading, and whipping. Moreover, the multipurpose hub allows users to attach additional accessories, enhancing the mixer’s versatility. This unique feature transforms the KitchenAid stand mixer into a multi-functional kitchen appliance, capable of grinding meat, making pasta, or even juicing fruits.

Durability is a defining characteristic of the KitchenAid 4366501. With a metal construction and a classic tilt-head design, it blends aesthetics with functionality. Available in a range of colors, it can complement any kitchen décor.

In summary, the KitchenAid 4366501 stand mixer is an exceptional kitchen tool that combines power, versatility, and durability. With its robust motor, ample capacity, and a variety of attachments, it empowers home cooks to explore their culinary creativity while ensuring seamless and efficient preparation of a multitude of recipes. Whether baking bread, mixing dough, or preparing decadent desserts, the KitchenAid 4366501 stands out as an essential kitchen companion.