KitchenAid 4366501 Now start, With cooktop in kitchen, Panel C, Numbers correspond to steps

Models: 4366501

1 5
Download 5 pages 38.26 Kb
Page 4
Image 4
Now start...

Now start...

With cooktop in kitchen.

Property Damage

Lift entire cooktop up from cutout when repositioning cooktop in countertop opening.

Failure to do so could scratch the countertop.

Remove the shipping materials and tape from the cooktop or grill. Remove

the hardware package from the side of the carton.

02 Insert the cooktop into the countertop.

. Center the cooktop in the cutout. Check that the front of the cooktop is

parallel to the front edge of the countertop. Check that all required clearances are met.

‘clamp

countertopcooktop

screw and clam assembly

7

 

burner\box

3

.

Insert one clamp

tab through

each slot

 

located on sides

of the burner

box.

Personal Injury Hazard

Do Not over-tighten screws.

Over-tightening screws could damage cooktop surface.

5 Make electrical connection. (See LJn “Electrical requirements” and

“Electrical connection” sections,

Panel B.)

Turn on power supply.

Personal Injury Hazard

Do Not touch cooktop surface. Areas near elements may be hot.

Touching a heated cooking surface could result in a serious burn.

Push in and turn each control knob to the “HI”position. Check the operation of the cooktop elements and indicator

ights.

To get the most efficient use from your new cooktop, read your KitchenAid Use and Care Guide. Keep Installation Instructions and Guide close to cooktop for easy reference.

34 Secure cooktop to countertop by hand- n tightening each screw; then use a

screwdriver to tighten each screw 1 to 1-l/2 more turns. Do Not overtighten screws.

Numbers correspond to steps.

Panel C

Page 4
Image 4
KitchenAid 4366501 installation instructions Now start, With cooktop in kitchen, Panel C, Numbers correspond to steps