Assembling the STAND MIXER
Placing/removing the pouring shield*
1 | To place pouring shield: Turn speed |
control to “O”. Unplug Stand Mixer. |
Attach your chosen accessory, see “Attaching/removing the flat beater, wire whip, or dough hook” section.
3 | To Remove pouring shield: Turn |
speed control to “O”. Unplug Stand |
Mixer.
2 | From the front of the Stand Mixer, slide |
the pouring shield over the bowl until |
the shield is centered. The bottom rim of the shield should fit within the bowl.
4 | Lift the front of the pouring shield |
clear of the bowl rim and pull forward. |
Remove attachment and bowl.
Using the pouring shield*
Use the pouring shield to avoid having ingredients splashing out of the bowl when mixing, as well as to easily pour ingredients in the bowl while mixing.
1 | For best results, rotate the shield so the |
motor head covers the |
in the shield. The pouring chute will be just to the right of the attachment hub as you face the Stand Mixer.
2 | Pour the ingredients into the bowl |
through the pouring chute. |
* Included only in models 5KSM150PS and 5KSM45. Also available as optional accessory.
12
W10572619A_01_Final.indd 12
4/12/13 8:41 AM 
