Assembling the STAND MIXER
Lifting/lowering the motor head
1 | To lift motor head: Push the locking |
lever to the UNLOCK position and lift |
the head. Once lifted, the lever will automatically go back in LOCK position to keep the head lifted.
2 | To put down motor head: Push the |
locking lever to UNLOCK and gently |
bring the head down. The locking lever will automatically go back in LOCK position when the head is down. Before mixing, test lock by attempting to raise motor head.
NOTE: Motor head should always be in LOCK position when using the Stand Mixer.
Attaching/removing the flat beater, wire whip, or dough hook
1 | To attach accessory: Turn speed |
control to “O”. Unplug Stand Mixer. |
2 | Hold the locking lever in the UNLOCK |
position and tilt motor head back. |
10
3 | Slip accessory onto beater shaft and |
press upward as far as possible. Then, |
turn accessory to the right, hooking accessory over the pin on the shaft.
W10572619A_01_Final.indd 10
4/12/13 8:41 AM