HT-SB500
Speaker connections to TVs (continued)
ENGLISH
Connecting to a TV
If the TV/monitor has an audio output, connect it to the LINE IN 1 sockets on the rear of the speaker.
To select LINE IN 1 function:
On speaker: Press FUNCTION button repeatedly until “L1” is displayed.
On remote control: Press LINE
Connecting to a TV (with Headphone socket)
If the TV/monitor has headphone socket, connect it to the LINE IN 2 socket on the rear of the speaker.
To select LINE IN 2 function:
On speaker: Press FUNCTION button repeatedly until “L2” is displayed.
On remote control: Press LINE
for Use
TV |
TV
To audio output sockets
HEADPHONE
To HEADPHONE socket
Preparation
RCA cable (supplied) | Audio cable (not supplied) |
| |
To LINE IN 1 | To AUDIO LINE |
sockets | IN 2 socket |
Speaker
Speaker
Notes:
If the TV volume is continuously in low level, the speaker will automatically power off. Increase the TV output volume to enjoy the sound from the speaker.
If the speaker volume is continuously in very high level, the speaker will mute and recover after several seconds.
The information display on the sound bar system will not display anything when increasing or decreasing the volume level.
