Sharp HT-SB500 operation manual Specifications

Specifications

HT-SB500

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production speaker. There may be some deviations from these values in individual speaker.

General

Power source	DC IN 12V	4A: AC/DC adaptor
	(AC 100 - 240 V ~ 50/60 Hz)
Power	Power on: 14 W
consumption	Power stand-by: 0.6 W (*)
Output power	Front speaker:
	RMS: 10 W (5 W + 5 W) (10% T.H.D.)
	Center Speaker:
	RMS: 7 W (10% T.H.D.)
	Subwoofer:
	RMS: 15 W (10% T.H.D.)
Speaker	3.1-way Speaker System
	Front speakers: 40 mm (1-9/16") Full Range
	(x 2)
	Impedance: 12 ohms / Channel
	Centre Speaker: 40 mm (1-9/16") Full
	Range (x 2)
	Impedance: 6 ohms
	(12 ohms x 2 parallel connections)
	Subwoofer: 57 mm (2-1/4") Woofer (x4)
	Impedance: 3 ohms
	(12 ohms x 4 parallel connections)
Audio output	Subwoofer Pre Out: 10 kohms
terminals

Input terminals	Analogue input (LINE 1):
	RCA type x 1pair (L/R)
	500 mV / 47 kohms
	Analogue input (LINE 2):
	Stereo mini socket Ø 3.5 mm
	100 mV / 47 kohms
	Coaxial digital input (DIGITAL 1):
	RCA type x 1
	Optical digital input (DIGITAL 2):
	Square type x 1
Dimensions	Width: 985 mm (38-3/4")
	Height: 96 mm (3-3/4")
	Depth: 70 mm (2-3/4")
Weight	2.2 kg (4.84 lbs.)

(*)This power consumption value is obtained when in the Touch Sensing off mode (RED).

ENGLISH

References

E-20