HT-SB500
ENGLISH
References
Maintenance
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet finish.
Do not apply oil to the inside of each component. It may cause malfunctions.
Error indicators and warnings
When you fail to perform operations properly, the following messages are displayed on the speaker.
Display |
| Meaning |
|
|
|
or | or | Malfunction of the surround |
circuit. Place the speaker away | ||
|
| from noise source and plug the |
|
| AC power lead into another AC |
or |
| outlet. (*) |
|
|
|
|
| When there is no input signal. |
|
| Play back the connected |
|
| equipment. |
|
| Nonstandard signal. Cannot be |
or |
| recognized. |
| Signals other than DOLBY | |
|
| DIGITAL, DTS, Linear PCM |
|
| cannot be recognized. |
|
| Poor connection of the digital |
|
| audio input terminal. |
|
| Turn off the unit and check if the |
(Display blinks continuously) | cable is connected properly. | |
| ||
|
| When the protection circuit is |
Power indicator |
| activated. |
|
| |
(blinks red) |
|
|
(*): Should the same message appear even if the speaker is unplugged and plugged in, or is set to the
