Gas Supply Line

■Provide a gas supply line of ³⁄₄" (1.9 cm) rigid pipe to the cooktop location. A smaller size pipe on longer runs may result in insufficient gas supply. Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape. With LP gas, piping or tubing size can be ½" minimum. Usually, LP gas suppliers determine the size and materials used in the system.

Flexible metal appliance connector:

■If local codes permit, use a ⁵⁄₈" flexible stainless steel tubing gas connector, designed by CSA to connect the cooktop to the rigid gas supply line.

Gas Pressure Regulator

The gas pressure regulator supplied with this cooktop must be used. The inlet pressure to the regulator should be as follows for proper operation:

Natural Gas:

Minimum pressure: 6" (15.2 cm) WCP

Maximum pressure: 7" to 14" (17.8 cm to 35.5 cm) WCP

LP Gas:

Minimum pressure: 11" (27.9 cm) WCP

Maximum pressure: 14" (35.5 cm) WCP

Contact local gas supplier if you are not sure about the inlet pressure.

■A ½" (1.3 cm) male pipe thread is needed for connection to the female pipe threads of the inlet to the appliance pressure regulator.

■Do not kink or damage the flexible metal tubing when moving the cooktop.

Rigid pipe connection:

The rigid pipe connection requires a combination of pipe fittings to obtain an in-line connection to the cooktop. The rigid pipe must be level with the cooktop connection. All strains must be removed from the supply and fuel lines so cooktop will be level and in line.

■Must include a shutoff valve:

The supply line must be equipped with a manual shutoff valve. This valve should be located in the same room but external to the cooktop. It should be in a location that allows ease of opening and closing. Do not block access to shutoff valve. The valve is for turning on or shutting off gas to the cooktop.

B

A

C

A. Gas supply line

B. Shutoff valve “open” position

C. To cooktop

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

Burner Input Requirements

Input ratings shown on the model/serial rating plate are for elevations up to 2,000 ft (609.6 m).

For elevations above 2,000 ft (609.6 m), ratings are reduced at a rate of 4% for each 1,000 ft (304.8 m) above sea level (not applicable for Canada).

Gas Supply Pressure Testing

Line pressure testing above ½ psi gauge (14" WCP)

The cooktop and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of ½ psi (3.5 kPa).

Line pressure testing at ½ psi gauge (14" WCP) or lower

The cooktop must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5 kPa).

8

Page 7 Page 9
Page 8
Image 8
KitchenAid 9759405C Gas Supply Line, Gas Pressure Regulator, Burner Input Requirements, Gas Supply Pressure Testing
Page 7 Page 9

9759405C specifications

The KitchenAid 9759405C is a versatile kitchen appliance that stands out for its robust features and innovative technologies, designed to enhance the culinary experience for home cooks and professional chefs alike. This appliance is part of a trusted brand known for quality and durability in kitchen products.

One of the main features of the 9759405C is its powerful motor, which provides consistent performance for various mixing tasks. Whether you are kneading dough for bread, whipping cream, or mixing batter for cakes, the strength of this motor can handle dense mixtures with ease. The appliance offers multiple speed settings, allowing users to select the ideal speed for their specific recipe. The versatility of speed options also ensures precision, whether you need a gentle fold or a vigorous mix.

Another standout characteristic of the KitchenAid 9759405C is its innovative planetary mixing action. This technology ensures that the mixing attachment moves in one direction while the bowl rotates in the opposite direction. This design allows for thorough mixing, which means ingredients are evenly combined without leaving unmixed pockets. It significantly reduces the time required to achieve optimal consistency in mixtures.

Durability is a hallmark of the 9759405C, as it is built with high-quality materials designed to withstand frequent use. The robust design and sturdy construction ensure that this mixer can endure the rigors of daily cooking. Additionally, it comes equipped with a variety of attachments, including a flat beater, dough hook, and wire whip, providing users with everything they need to tackle a wide range of cooking tasks.

The appliance's user-friendly interface and ease of operation make it accessible to cooks of all skill levels. The tilt-head design allows for easy access to the mixing bowl and makes it simple to add ingredients during operation.

Furthermore, the KitchenAid 9759405C’s sleek, modern design fits well into various kitchen aesthetics, making it not only a functional tool but also an attractive addition to your kitchen countertop. Its thoughtful features, coupled with advanced technology, make the 9759405C an essential appliance for anyone looking to elevate their cooking game. Whether you are a beginner or a seasoned chef, this mixer can simplify your culinary tasks and help you create delicious dishes with ease.
Top Page Image Contents