PRODUCT DATA SHEETS

Base Grille Water Filtration System

Model WF-LC400V/LC400V Capacity 400 Gallons (1514 Liters)

Tested and certified by NSF International against ANSI/NSF Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class I*; and against ANSI/NSF Standard 53 for the reduction of Lead, Mercury, Atrazine, Benzene, Toxaphene, p-dichlorobenzene, 2, 4-D, Cysts, Turbidity and Asbestos.

This system has been tested according to ANSI/NSF 42/53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in ANSI/NSF 42/53.

Substance Reduction

NSF Reduction

Average

Influent Challenge

Maximum

Average

Minimum %

Average %

Aesthetic Effects

Requirements

Influent

Concentration

Effluent

Effluent

Reduction

Reduction

 

 

 

 

 

 

 

 

Chlorine Taste/Odor

50%

2.1 mg/L

2.0 mg/L ± 10%

0.06 mg/L

0.05 mg/L

97.1%

97.6%

Particulate Class 1*

85%

5,366,667/mL

At least 10,000

4,100/mL**

2,300/mL

99.3%

99.9%

 

 

 

particles/mL

 

 

 

 

 

 

 

 

 

 

 

 

Contaminant

NSF Reduction

Average

Influent Challenge

Maximum

Average

Minimum %

Average %

Reduction

Requirements

Influent

Concentration

Effluent

Effluent

Reduction

Reduction

 

 

 

 

 

 

 

 

Lead: @ pH 6.5

0.01mg/L

0.152 mg/L†

0.15 mg/L ± 10%

0.001 mg/L

0.001 mg/L

99.34%

99.34%

Lead: @ pH 8.5

0.01mg/L

0.143 mg/L†

0.15 mg/L ± 10%

0.001 mg/L

0.001 mg/L

99.30%

99.30%

 

 

 

 

 

 

 

 

Mercury: @ pH 6.5

0.002 mg/L

0.0061 mg/L

0.006 mg/L ± 10%

0.0004 mg/L

0.0003 mg/L

93.5%

96.7%

Mercury: @ pH 8.5

0.002 mg/L

0.0057 mg/L

0.0058 mg/L ± 10%

0.0008 mg/L

0.00051 mg/L

85.8%

91.2%

 

 

 

 

 

 

 

 

Benzene

0.005 mg/L

0.0162 mg/L

0.015 ± 10%

0.0005 mg/L

0.001 mg/L

96.3%

96.3%

 

 

 

 

 

 

 

 

p-dichlorobenzene

0.075 mg/L

0.220 mg/L

0.225 ± 10%

0.0005 mg/L

0.0005 mg/L

99.7%

99.7%

 

 

 

 

 

 

 

 

Toxaphene

0.003 mg/L

0.014 mg/L

0.015 ± 10%

0.0014 mg/L

0.001 mg/L

90%

92.96%

 

 

 

 

 

 

 

 

Atrazine

0.003 mg/L

0.0086 mg/L

0.009 mg/L ± 10%

0.0005 mg/L

0.0005 mg/L

94.25%

94.25%

 

 

 

 

 

 

 

 

2, 4-D

0.07 mg/L

0.197 mg/L

0.210 ± 10%

0.058 mg/L

0.0137 mg/L

70.6%

93.06%

 

 

 

 

 

 

 

 

Asbestos

99%

26 x 107

107 to 108 fibers/L††

0.18 x 107 mg/L

0.18 x 107 mg/L

99.93

99.93%

 

 

 

 

 

 

 

 

Cysts‡

99.95%

111,000/mL

50,000/L min.

1 mg/L

1 mg/L

99.99%

99.99%

Turbidity

0.5 NTU

11.00 NTU

11 ± 1 NTU

0.40 NTU

0.35 NTU

96.4%

96.8%

 

 

 

 

 

 

 

 

Test Parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 63°F (17.2°C).

It is essential that operational, maintenance, and filter replacement requirements be carried out for the product to perform as advertised.

Model WF-LC400VThe filter monitor system measures the amount of water that passes through the filter and alerts you to replace the filter. When 90% of the filter’s rated life is used, the filter indicator light changes from green to yellow. When 100% of the filter’s rated life is used, the filter indicator light changes from yellow to red, and it is recommended that you replace the filter. Use replacement cartridge LC400V, part #4396548. 2005 suggested retail price of $39.99 U.S.A./ $49.95 Canada. Prices are subject to change without notice.

The product is for cold water use only.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Refer to the front cover or “Accessories” section for the Manufacturer’s name, address and telephone number.

Refer to the “Warranty” section for the Manufacturer’s limited warranty.

Application Guidelines/Water Supply Parameters

Water Supply

City or Well

Water Pressure

30 - 120 psi (207 - 827 kPa)

Water Temperature

33° - 100°F (0.6° - 37.8° C)

Service Flow Rate

0.5 GPM (1.89 L/min.) @ 60 psi.

*Class I particle size: >0.5 to <1 um

**Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.

These contaminants are not necessarily in your water supply. Performance may vary based on local water conditions. ††Fibers greater than 10 um in length

Based on the use of Cryptosporidium parvum oocysts

®NSF is a registered trademark of NSF International.

17

Page 17
Image 17
KitchenAid Bottom-Mount Built-In Refrigerator manual Product Data Sheets, Application Guidelines/Water Supply Parameters

Bottom-Mount Built-In Refrigerator specifications

The KitchenAid Bottom-Mount Built-In Refrigerator epitomizes modern kitchen design, merging style and functionality to elevate your culinary experience. With its sophisticated appearance and advanced features, this refrigerator promises not only to meet your storage needs but also enhance the overall aesthetic of your kitchen.

One of the standout features of the KitchenAid Bottom-Mount Refrigerator is its bottom-mount design, which places fresh foods at eye level, making them easily accessible. This layout encourages users to choose healthier options, as fruits and vegetables are within reach. The freezer compartment located at the bottom provides ample storage with pull-out bins, allowing efficient organization of frozen goods.

This refrigerator boasts a generous capacity, providing ample space for groceries and leftovers. Advanced cooling technologies, such as the ExtendFresh Plus Temperature Management System, maintain optimal temperatures to ensure food stays fresh longer. This system employs sensors that continually monitor temperatures and defrost cycles, promoting the preservation of flavors and nutrients.

Another remarkable feature of this model is its adjustable shelves, designed for versatility. The glass shelves can be repositioned to accommodate tall items, while the clear bins help keep small goods visible and organized. Integrated LED lighting illuminates the interior, ensuring every corner is well-lit, making it easy to find what you need even in low light conditions.

The KitchenAid Bottom-Mount Refrigerator is also equipped with a FreshSeal crisper drawer that provides a controlled environment for fruits and vegetables, extending their shelf life. The crisper drawer includes humidity controls, allowing users to customize settings based on what they store.

In terms of aesthetics, the refrigerator is designed to blend seamlessly into cabinet spaces with a panel-ready option, allowing for a cohesive look in any kitchen. The stainless steel finish not only conveys elegance but is also fingerprint-resistant, ensuring the surface remains clean and pristine.

In conclusion, the KitchenAid Bottom-Mount Built-In Refrigerator combines cutting-edge technology, innovative design, and user-friendly features, making it an excellent choice for any modern kitchen. Its focus on freshness, accessibility, and style is sure to cater to culinary enthusiasts and busy households alike, ensuring that this appliance is more than just a refrigerator—it’s a kitchen essential.