2.Connect the bare ground wire to the range using the ground- link screw and cup washer. The ground wire must be attached first and must not contact any other terminal.

D

C

E

F

B

AG

A. Bare wire from power

E. Line 2

supply cable

F. Neutral (white) wire

B. Line 1

G. UL listed conduit

C. Hex washer head screw

connector and power

D. Silver-colored terminal

supply cable

block screw

 

3.Loosen (do not remove) the hex washer head screw and insert the neutral (white) wire under the screw clamp at the bottom of the center position terminal connector.

4.Insert the other 2 wires (lines 1 and 2) under the other 2 screw clamps.

B

A

A.Insert wire under screw clamp.

B.Hex washer head screw

5.Securely tighten the hex washer head screws to

35 lbs-in. (4.0 N-m) minimum torque to make proper electrical connection.

6.Tighten the locking ring of the conduit connector.

7.Replace the terminal block cover.

3-wire connection: Direct Wire

Use this method only if local codes permit connecting ground conductor to neutral supply wire.

1.Loosen (do not remove) the hex washer head screws and insert the neutral (white) wire under the screw clamp at the bottom of the center position terminal connector.

 

D

C

 

 

E

 

F

B

G

 

A

 

A. Line 1

E. Neutral (white) wire

B. Ground-link

F. Line 2

C. Hex washer head screw

G. UL listed conduit

D. Silver-colored terminal

connector and power

block screw

supply cable

2.Insert the other 2 wires (lines 1 and 2) under the other 2 screw clamps.

B

A

A.Insert wire under screw clamp.

B.Hex washer head screw

3.Securely tighten the hex washer head screws to

35 lbs-in. (4.0 N-m) minimum torque to make a proper electrical connection.

4.Tighten the locking ring of the conduit connector.

5.Replace the terminal block cover.

MakeGasConnection

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Typical rigid pipe connection

A combination of pipe fittings must be used to connect the range to the existing gas line. Your connections may be different, according to the supply line type, size and location.

1.Apply pipe-joint compound made for use with LP gas to all pipe thread connections.

16

Page 15 Page 17
Page 16
Image 16
KitchenAid DUALFUEL RANGES installation instructions MakeGasConnection, Typical rigid pipe connection
Page 15 Page 17

DUALFUEL RANGES specifications

KitchenAid DUALFUEL RANGES are designed to offer a seamless fusion of gas and electric cooking technologies, providing home chefs with the best of both worlds. These ranges combine powerful gas burners for precise cooking control with the consistent and even heating of an electric oven, making them ideal for a variety of culinary tasks.

One of the standout features of KitchenAid DUALFUEL RANGES is the gas burners equipped with high BTU output. This ensures rapid heat-up times, allowing users to achieve high heat for searing meats or quickly boiling water. The burners are also designed with precise simmer settings, perfect for delicate sauces and melting chocolate without risk of burning. Additionally, the range often includes a removable burner cap, making it easier to clean.

The electric ovens in these ranges offer sophisticated baking capabilities through their Even-Heat technology. This feature ensures that every inch of the oven is heated consistently, providing optimal baking results, whether you’re baking a soufflé or roasting vegetables. Some models also come with a convection option, which circulates air for quicker, more uniform cooking, and browning. This can greatly enhance the results for baked goods, ensuring that cookies and cakes rise perfectly every time.

Another notable characteristic of KitchenAid DUALFUEL RANGES is the inclusion of an integrated temperature probe. This handy tool allows chefs to monitor the internal temperature of their dishes without opening the oven door, ensuring perfectly cooked meat every time while conserving energy and maintaining optimal heat levels.

Ease of use and elegant design are also hallmarks of KitchenAid DUALFUEL RANGES. With an intuitive control panel, backlit knobs, and sleek stainless-steel finishes, these ranges add a touch of sophistication to any kitchen. Many models also feature self-cleaning options that simplify maintenance, allowing homeowners to spend less time scrubbing and more time enjoying their culinary creations.

In summary, KitchenAid DUALFUEL RANGES deliver exceptional cooking performance through their powerful gas burners and innovative electric ovens. With features like Even-Heat technology, precise controls, a built-in temperature probe, and easy maintenance, these ranges represent a perfect blend of functionality and style, making them an excellent choice for both home cooks and culinary enthusiasts.
Top Page Image Contents