Models KAWS750J, KAWS850J and KAWS855J

Handwash option

 

 

 

 

 

 

 

 

 

Use this option to gently clean washable wool garments (refer to

 

 

 

 

 

 

 

 

 

your garment’s care label).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To use this option

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.

Turn the FABRIC SELECT option to HANDWASH.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

Set the TEMPERATURE selector to the SENSORSURE®

 

 

 

 

 

 

 

 

 

3.

COLD/COLD setting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set the Cycle Control knob to a 6-minute Normal wash cycle.

 

 

 

 

 

 

 

 

 

 

 

 

SENSORSURE® TemperatureControl

SENSORSURE temperature control electronically senses and maintains a uniform water temperature by regulating incoming hot and cold water.

SENSORSURE control keeps warm and cold water temperatures within recommended ranges for best detergent performance and fabric care.

Cold wash is regulated at approximately 75°F (24ºC).

Warm wash is regulated at approximately 100°F (38°C).

To select SENSORSURE control

Turn the TEMPERATURE selector to a SENSORSURE setting.

Normal cycle

The Normal cycle is used with the Fabric Select option to provide the best wash and spin action for a given load. Select 6, 10 or 12 minutes of wash time depending on whether your load is lightly, moderately or heavily soiled.

Extra Wash – Select the 16-minute Extra Wash feature to wash heavily soiled loads that need maximum soil removal. Use two times the amount of recommended detergent for this cycle.

Wrinkle Resist/Permanent Press cycle

The Wrinkle Resist/Permanent Press cycle is used with the Fabric Select option to provide the best wash and spin action for a given load. The Wrinkle Resist/Permanent Press cycle features a pause and cool down rinse to reduce wrinkling. Use 6 or 10 minutes of wash time for lightly to moderately soiled loads.

Soak cycle

The Soak cycle features brief periods of agitation and soak time to help remove heavy soils and stains that need pretreatment.

Use warm water when soaking laundry. Hot water can set stains.

Use the amount of detergent or presoak additive recommended by the manufacturer.

The Soak cycle automatically advances into the Pre-Wash cycle.

Pre-Wash cycle

The Pre-Wash cycle features 4 minutes of agitation to help remove heavy soils and stains that need pre-treatment. When the Pre-Wash period ends, add detergent and start a new wash cycle.

AdditionalFabricSelectoptions availableonthe

KAWS850J andKAWS855J models

Sweaters option

Use this option to gently clean non-wool sweaters.

To use this option

1.Turn the FABRIC SELECT option to SWEATERS.

2.Set the TEMPERATURE selector to the SENSORSURE® COLD/COLD setting.

3.Set the Cycle Control knob to a 6-minute Normal wash cycle.

Rinse and Spin

When using extra detergent for heavily soiled clothes, or washing special-care items, you may find an extra rinse and spin is needed.

1.Push in the Cycle Control knob and turn it clockwise to any of the Rinse settings.

2.Pull out the Cycle Control knob. The washer fills to the selected load size, agitates, drains, and spins.

NOTE: An Extra Rinse option is available (on some models). See “Starting Your Washer.”

Drain and Spin

A drain and spin may help shorten drying times for some heavy fabrics or special-care items by removing excess water.

1.Push in the Cycle Control knob and turn it clockwise to any of the Spin settings.

2.Pull out the Cycle Control knob. The washer drains, then spins.

WASHER CARE

CleaningYour Washer

Cleaning the exterior

Use a soft, damp cloth or sponge to wipe up any spills such as detergent or bleach. Occasionally wipe the outside of your washer to keep it looking new.

8

Page 8
Image 8
KitchenAid KAWS700J, KAWS750J, KAWS850J, KAWS855J manual Washer Care, Sensorsure TemperatureControl, Rinse and Spin