7.0.3 Cleaning the quartz tube
We advise you to clean the quartz tube once every 6 months.
BWarning:
Handle the quartz tube with care, as it might break and cause injury. Do not tamper with the quartz tube (apply glue, etc.).
1Switch off the pure water dispenser.
2Open the cover of the UV chamber.
3To remove the UV lamp unit, follow steps 1 to 5 in section ‘Replacing the UV lamp unit’.
4Pull out the quartz tube with the rubber ring.
5Remove the rubber ring.
6Clean the quartz tube with a clean moist cloth and dry it completely.
7Reinsert the rubber ring to a depth of 2- 3mm from the open end.
Eng l ish
8Insert the tube with the rubber ring in the UV chamber.
D Note:
Make sure you put the rubber ring and quartz tube in the correct position.
9To reattach the UV lamp unit, follow steps 6 to 8 in section ‘Replacing the UV lamp unit’.
10Close the cover of the UV chamber.
7.0.4 Replacing the filter
DNote:
Switch off the pure water dispenser before you replace the filter.
The filter has a capacity of up to 3000 litres. When 2700 litres have passed through the filter, the filter indicator c starts flashing to indicate that you need to replace the filter. At this point, the appliance can still dispense another 300 litres of water, giving you time to arrange a new filter. The filter indicator keeps flashing until 3000 litres have passed through the filter.Then the filter indicator lights up red continuously and the pure water dispenser does not dispense water until you replace the filter.
DNote:
We advise you to change the filter every
6 months, even though you might not have consumed 3000 litres. Filter life is subject to the actual level of impurities in your water supply. The filter may therefore expire before 3000 litres without any warning period.
1Switch off the pure water dispenser.
13
