button. Keep both buttons pressed simultaneously for at least 4 seconds.
•The pure water dispenser now acknowledges the new filter.
•The filter indicator c goes off.
DNote:
If the filter warning still persists, repeat step 2.
3Place a container with a capacity of at least
10 litres under the pure water dispenser.
•The pure water dispenser automatically performs the PureFlush procedure, during which 10 litres of water flow out of the appliance.
7.0.6 Replacing the UV lamp unit
BWarning:
Always replace the UV lamp unit with an original Philips UV lamp (code no. 421530875020).
1Switch off the pure water dispenser.
2Remove the cover of the UV chamber.
3Disconnect the UV lamp wire connectors.
4Unscrew the UV lamp retaining cap.
Eng l ish
5Remove the UV lamp unit (lamp, rubber seal and lamp holder).
6Insert the new UV lamp unit.
7Reattach the lamp retaining cap.
8Reconnect the wire connectors.
9Close the cover of the UV chamber.
7.0.7 Replacement items
If you have any difficulties obtaining replacement items for this appliance, please contact the Philips Customer Care Centre in your country or consult the worldwide guarantee leaflet.
Always replace the dual filter with an original Philips dual filter, type number WP3990. Always replace the UV lamp unit with an original Philips UV lamp unit, code number 421530875020.
15
