2Open the appliance door (1). Pull the filter towards you with the lever (2) and slightly tilt the filter.
3Turn the filter cap (1) and remove it (2).
6Align the arrow on the cap with the arrow on the filter housing and press the cap down firmly (1).Turn the cap clockwise to fix it (2).
7Push the filter holder back into place (1) and close the appliance door (2).
4Grab the handle on top of the filter (1) and slowly pull the filter out of the holder (2).
5Put a new filter in the filter holder.
DNote:
Each time you replace the filter, make sure you also clean the macro filter (see section ‘Cleaning the macro filter’ above).
Once you have replaced the filter, you have to confirm replacement of the filter.The pure water dispenser only operates normally again after you confirm replacement of the filter.
7.0.5Confirming filter replacement
1 Switch on the pure water dispenser.
• If you replaced the filter during the warning period (between 2700 and 3000 litres), the filter indicator c flashes.Wait until the dispense button d starts flashing (ready to dispense - manual mode).
• If you replaced the filter after filter expiry, the filter indicator lights up continuously.
2 Press and hold the MUSIC button and then press and hold the dispense
14
