Quality Association, USA) for products that meet or exceed industry standards for contaminant reduction, structural integrity and material safety.
4 Preparing for use
We advise you to have the pure water dispenser installed by trained service technicians.
DNote:
If the water pressure in your area is lower than the specified minimum pressure (0.5 bar), we advise you to use a suitable domestic water pump.
DNote:
If the water pressure in your area is higher than the specified maximum pressure (2.0 bar), the use of a pressure reducing valve is required.
4.1 Installation
1Select a suitable location for the pure water dispenser.
•Install the pure water dispenser at a convenient and safe location where it poses no risk of injury.
•Install the pure water dispenser 1m away from the tap.
1m
•Install the pure water dispenser
in vertical position. Do not install it at an angle or in horizontal position.
•Only connect the mains plug of the pure water dispenser to a socket located higher than the pure water dispenser.
•Make sure that the display is at eye level or slightly above eye level.
2Drill 3 holes in the wall as shown in picture.
Eng l ish