How to run the scale removal cycle
8
Starting scale removal cycle
It is important to run the scale removal cycle where the appliance is
used in areas of hard or very hard water. An LED (shown below) will
light up to remind you to run the scale removal cycle every 30 cycles.
There is variety of products which could be used to remove scale, dirt
and grease (f.e. Calgonit). Please follow the detergent manufacturer’s
instructions.
How to turn off the LED
To turn off the LED press the start button for 3 seconds whilst in
programme selection mode. We recommend that switching off this
LED just before starting the Scale removal cycle.
How to test ground fault circuit interrupter (GFCI)
This product is provided with a Ground Fault Circuit Interrupter (GFCI)
located on the front base of the dishwasher inside the cabinet. A GFCI is
designed to protect you against the dangers of line to ground electrical
faults. If the appliance develops a fault of this type, the GFCI is designed
to disconnect the power to the appliance. This is a built-in safety feature.
The GFCI should be tested once a month.
GFCI test procedure: this MUST be done once a month.
1. Unscrew two bolts (A) and remove GFCI cover (B) located on the
front base of the dishwasher inside the cabinet.
2. Make sure that indicator (D) is in “1” position.
3. Turn on dishwasher if it is off – press main switch (C) to “on” position
(LED’s are lighting).
4. Press TEST button (E). Indicator should switch into “0” position.
5. Switch back indicator into “1” position.
6. Replace the GFCI cover and screw down two bolts.
NOTE:If the GFCI fails this test , do not use this dishwasher. Please call
the Customer Care Centre immediately.
GROUNDING INSTRUCTIONS
• For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event
of a malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a
path of least resistance for electric current. The
dishwasher is equipped with a cord having an
equipment-grounding conductor and a
grounding plug. The plug must be plugged into
an appropriate outlet that is installed and
grounded in accordance with all local codes and
ordinances.
WARNING:Improper connection of the
equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified
electrician or service representative if you are in
doubt whether the dishwasher is properly
grounded. Do not modify the plug provided
with the dishwasher; if it will not fit the outlet,
have a proper outlet installed by a qualified
electrician.
• For a permanently connected dishwasher:
The dishwasher must be connected to a
grounded metal, permanent wiring system, or
an equipment-grounding conductor must be run
with the circuit conductors and connected to
the equipment-grounding terminal or lead on
the dishwasher.
SAVE THESE INSTRUCTIONS
501970902004_GB 26-07-2007 9:14 Pagina 8