Rinse aids prevent water from forming small
droplets that can dry as spots or streaks. They also
improve drying by allowing water to drain off of
the dishes during the final rinse by releasing a small
amount of the rinse aid into the rinse water. Your
dishwasher is designed to use a liquid rinse aid. Do
not use a solid or bar-type. If you use “4 in 1”
tablets (with rinse aid) do not fill rinse aid
dispenser.
Filling the dispenser
The rinse aid dispenser holds 100 ml of rinse aid.
Under normal conditions, this will last for about 3
months. You do not have to wait until the
dispenser is empty to refill it. Try to keep it full, but
be careful not to overfill it.
1. Make sure the dishwasher lid is fully open.
Locate the rinse aid fill on the right-hand side of
the dishwasher back wall.
2. Open the rinse aid fill by unscrewing the cap.
3. Add rinse aid until container is full.
4. Clean up any spilled rinse aid with a damp cloth.
5. Replace the cap and tighten.
Rinse Aid Empty indicator
When the Rinse Aid Empty indicator is lit on the
control panel, you need to refill the rinse aid. If you
are using 4in1 tablets do not fill rinse aid dispenser.
Tablets contain enough rinse aid.
Rinse aid dispenser
14
Rinse aid
dispenser
Rinse aid
fill
501970902004_GB 26-07-2007 9:14 Pagina 14