11
Sealed surface burners and cooktop
Porcelain (top side
only) burner cap

Cleaning the surface burners

•You should routinely remove and clean the
burner caps. Always clean the burner caps after
a spillover. Keeping the burner caps clean
prevents improper ignition and an uneven flame.
•For the proper flow of gas and ignition of the
burner, DO NOTALLOW SPILLS, FOOD, CLEAN-
ING AGENTS, OR ANYOTHER MATERIAL TO
ENTER THE GAS TUBE OPENING.
•Gas must flow freely through the gas tube
opening for the burner to light properly. You must
keep this area free of any soil and protect it from
boilovers or spillovers. ALWAYS keep the burner
cap in place whenever a surface burner is in use.
•Let the cooktop cool before cleaning.
•Do not use oven cleaners, bleach, or rust
removers.
•Do not obstruct the flow of combustion and
ventilation air.
Alignment pins
•Occasionally check the burner flames for proper
size and shape as
shown. A good flame
is blue in color. If the
flames are uneven, you
may need to clean the
burners.
Gas tube
opening
Burner
base
Ignitor
Caring for Your Cooktop