Microwave Oven Hood Combo Service Manual — LIT 4317216
Original 03/97
Page
REMOVING THE SYNCHRONOUS MOTOR
WARNING
Personal Injury Hazard
Disconnect from the electrical supply be- fore servicing the unit. Failure to do so could result in death or electrical shock.
1.Disconnect the electrical supply to the microwave oven.
2.Remove the vent grille and the base plate from the microwave oven (see the illus- tration on page
3.Open the oven door and pry up the bottom panel and remove it from the oven (see inset 1).
4.Lift the turntable off the motor shaft and remove it.
5.From the bottom of the oven, pull the connectors off the synchronous motor ter- minals.
6.Remove the two motor mounting screws from the synchronous motor and remove the motor (see inset 2).
7.Install the new motor and then reassemble the microwave oven.
DISTRIBUTION BLADE
NOTE “TOP”
| BOTTOM PANEL | MOTOR |
| OF OVEN | SHAFT |
|
|
|
|
|
|
INSET 1 |
PRY UP EDGE OF |
BOTTOM PANEL WITH |
A PUTTY KNIFE |
INSET 2
BOTTOM
OF OVEN
SYNCHRONOUS
MOTOR
YELLOW WIRE
BROWN WIRE
MOUNTING
SCREWS