6
Simmer
The Simmer function can be used on all surface cooking areas.
Simmer can be used on more than 1 surface cooking area at a
time.

To U se:

To Tu rn On:
1. Check that a surface cooking area has been selected.
2. Touch SIMMER. “A” will appear in the display, and the
indicator light next to Simmer will light.
The timer remains visible and can be set if desired.
To Tu rn Off :
Simmer can be turned off in 3 different ways:
1. Use the power slider to set to a heat level.
OR
2. Touch the surface cooking area OFF keypad.
OR
3. Select a different cooking function.
Melt + Hold
The Melt + Hold function can be used on all surface cooking
areas. Melt + Hold can be used on more than 1 surface cooking
area at a time.

To U se

To Tu rn On:
1. Check that a surface cooking area has been selected.
2. Touch MELT + HOLD. “A” will appear in the display, and the
indicator light next to Melt + Hold will light.
The timer remains visible and can be set if desired.
To Tu rn Off :
Melt + Hold can be turned off in 3 different ways:
1. Use the power slider to set to a heat level.
OR
2. Touch the surface cooking area OFF keypad.
OR
Select a different cooking function.
Pan Detection
If a pan is removed from a surface cooking area when it is in use,
the “no pan” indicator lights up. A flashing dash “-” will also
appear in the display along with an “alert” tone for 1 minute. If the
pan is not correctly replaced within 30 seconds, the surface
cooking area will switch Off.
If a Timer is running when a pan is removed, the countdown will
continue to count down.
Control Lock
The Control Lock avoids unintended use of the surface cooking
areas.
If Control Lock is activated when power to the cooktop is o ff, the
cooktop is locked out, and the surface cooking areas cannot be
turned on by the cooktop touch controls.
If Control Lock is activated when power to the cooktop is on, all
keypads are locked out except for the Power and On/Off
keypads.
To Lock Cooktop:
Touch and hold the CONTROL LOCK keypad for 3 seconds. After
3 seconds, a tone will sound and the indicator light above the
Control Lock keypad will light, indicating t hat the cooktop
controls are in the lockout position.
If the cooktop is in use when Control Lock is activated, cooking
will proceed as normal and any timers that have been set will
continue their countdown.
To Unlock Cooktop:
Touch and hold the CONTROL LOCK keypad for 3 seconds.
Performance Boost Function
This function allows you to increase the heat setting level above
the maximum heat setting 9 for 10 minutes or less.
NOTES:
Performance Boost function is available on only 1 surface
cooking area at a time within a zone. See the following
illustrations for zones.
Zone 1 Zone 2
A.Surface cooking area 1
B.Surface cooking area 2
C.Surface cooking area 3
D.Surface cooking area 4

BC

D
A