Faceplate Assembly
& Screws
Assembly includes the
grind control dial and
grind level ring. Two
faceplate screws attach the
faceplate assembly to the motor
housing. Loosen the screws and
remove the faceplate assembly to
access the burrs.
Precision Stainless
Steel Cutting Burrs
Large 21⁄4-inch
diameter flat cutting
burrs provide long life
and superb grind consistency. Burrs
can be adjusted to compensate for
wear, or calibrated to meet stringent
Specialty Coffee Association of
America guidelines for espresso and
French Press grinds.
12
Low-RPM Operation
A special DC motor and gear
reduction system slows the rotation
of the cutting burrs, minimizing
the frictional heating of the grinds
and preserving coffee flavor and
aroma. The low rpm operation also
reduces the static charge – and
“cling” – of coffee grinds.
Power Cord with Tie
Round cord has no grind-trapping
seams; the tie can be used to bundle
any excess.
One-Piece Metal Base with
No-Slip Rubber Feet
Metal base provides a stable
platform for the grinder. Rubber feet
dampen noise and vibration, and
help protect the countertop.
Burr Cleaning Brush
Dense bristles sweep
grinds from the
cutting burrs quickly
and easily.