18
7. Re-attach the grind control dial,
making certain the dial indicator
points to grind level “8”.
NOTE: If the coffee mill produces a
grating or “rubbing” sound during
use, the burrs have been improperly
adjusted. Damage to the burrs will
result. Readjust the burrs immediately.
Adjusting to Provide
Coarser Grinds
When the mill is adjusted to provide
coarser grinds, grind sizes will increase
throughout the grinding range and
the finest level may become too
coarse for espresso. (To re-calibrate
the grinder for maximum fineness,
see page 16.)
1. Turn the grind control dial to
level “1”.
2. Using a 5⁄32-inch allen wrench or
hex-head screwdriver, remove the
screw located in the front of the
grind control dial by turning it
counter-clockwise. Once the
screw is free, remove the grind
control dial.The white grind
control gear should be visible once
the dial is removed.
3. Rotate the grind control gear
counter-clockwise 1 “click” or
detent at a time until the
“clicking” sound diminishes and
the gear offers little resistance to
being turned.
4. Re-attach the grind control dial,
making certain the dial indicator
points to level “1”.
ADJUSTING THE
CUTTING BURRS