KitchenAid KSRF36DT manual Now start, 8.15, Numbers correspond to steps

Now start...

Remove top grille assembly

. package, literature package El and parts bag taped to the refrigerator door and save.

El Remove the four brackets (2 on each side) that attach

’ shipping base

to the bottom of the refrigerator. Discard brackets and shipping base. Do Not remove tape and door bracing at this time.

Place appliance dolly under the side of the refrigerator. Wrap strap from truck

loosely around refrigerator. Insert two corner posts around handles to prevent scratching. Tighten strap making sure that handles will be protected.

Personal Injury Hazard

lBecause of the weight and size of the built-in refrigerator, two or more people are needed to move and safely install it.

lMost of the refrigerator’s weight is at the top. Extra care is needed when moving the refrigerator to prevent tipping.

Failure to do so could result in personal injury.

Floor Damage

Keep cardboard shipping piece or plywood under refrigerator until it is installed in operating position.

Failure to do so may cause damage to floor covering.

5.

Numbers correspond to steps

14Move refrigerator to kitchen. Place cardboard

n or plywood under

refrigerator. Remove appliance dolly. Open doors and remove all boxes, parts packages and packing materials from inside refrigerator and freezer compartments. Set aside until needed during installation.

Do Not remove any protective film until refrigerator is completely installed.

13.

14.

8.15.

8.

Page 8