Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Controls.”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements” in either the Installation Instruction booklet or the Use & Care Guide.

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Is there a water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing.

The ice dispenser will not operate properly

■If the ice storage bin is located on the door, remove the temporary shield from underneath the ice storage bin. See “Ice Maker and Storage Bin.”

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Ice bin installed correctly? Be sure the ice bin is firmly in position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Ice stuck in the delivery chute? Use a plastic utensil to clear the delivery chute.

■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

11

Page 10 Page 12
Page 11
Image 11
KitchenAid KSRS25CSBL, KSRP25FSWH00, KSRP25FSBT00, KSRP25FSSS00, KSRN25FRWH01 Temperature and Moisture, Ice and Water
Page 10 Page 12

KSRT25CRMS01, KSRP25FSBT00, KSRN25FRWH01, KSRS25CSBL, KSRT25CRWH01 specifications

The KitchenAid KSRT25CRBT01, KSRT25CRBL01, KSRP25FSWH00, KSRP25FSSS00, and KSRP25FSBL00 are part of KitchenAid's line of top-quality refrigerators, designed with innovative features that cater to modern kitchen needs. These models are characterized by their robust build quality and stylish finishes, making them both functional and aesthetically pleasing.

One of the standout features of these refrigerators is their Energy Star certification, which ensures energy efficiency and reduced utility costs. KitchenAid has integrated advanced cooling technologies that maintain optimal temperatures, preserving the freshness of food for longer periods. The models come equipped with the Preserva Food Care System, featuring dual evaporators, which helps regulate humidity levels separately in both the refrigerator and freezer compartments. This dual system prevents odor transfer and maintains the ideal environment for fresh ingredients.

Another key technology in these models is the Fresh Seal crisper drawers, designed to provide a controlled environment for fruits and vegetables. These drawers enhance the longevity of produce by minimizing moisture loss and protecting delicate items. Additionally, the built-in water filtration system ensures that not only is the stored food fresh, but the drinking water and ice produced are also pure and clean.

Storage capacity is another highlight of the KSRT25 and KSRP25 series. With adjustable shelves and spacious door bins, users can customize their storage spaces according to their needs. The Easy Reach shelving system allows for quick access to frequently used items, enhancing overall convenience in everyday use.

These refrigerators also feature a sleek exterior with a stainless steel finish or a traditional white option, depending on the model chosen. The LED lighting not only illuminates the interior, making it easy to find items, but also saves energy compared to traditional bulbs.

In terms of design, the models include a striking handle style that enhances their modern look, while the fingerprint-resistant finish ensures that they remain easy to clean and maintain. With a combination of aesthetics, functionality, and advanced technology, the KitchenAid KSRT25CRBT01, KSRT25CRBL01, KSRP25FSWH00, KSRP25FSSS00, and KSRP25FSBL00 refrigerators stand out as excellent choices for anyone looking to elevate their kitchen experience.
Top Page Image Contents