Cabinet
1.Remove ⁵⁄₁₆"
2.Remove cabinet hinge hole plugs from cabinet top and move them to opposite side hinge holes as shown. See
Graphic
Freezer door
1.Remove freezer handle assembly as shown. Keep all parts together. See Graphic 2.
2.Remove door hinge hole plug. Move to opposite side as shown. See Graphic 3.
3.Remove door handle sealing screws. Move to opposite side of freezer door as shown. See Graphic 4.
4.Remove door stop. Move to opposite side of freezer door as shown. See Graphic 5.
5.Position handle on opposite side of freezer door. Assemble handles on door as shown. See Graphic 2.
6.Tighten all screws. Set aside door until hinges and refrigerator compartment door are in place.
Refrigerator door
1.Remove the handle screw cover. Depending on your model, see Graphic
2.Remove the handle screws. Keep all parts together. See Graphic
3.Remove door hinge hole plug from the refrigerator door. Move to the opposite side hinge hole as shown. See Graphic 3.
4.Remove the door handle sealing screws. Move to opposite side of the refrigerator door. See Graphic 4.
5.Remove door handle seal screw front. Move to opposite side of refrigerator door as shown. See Graphic 7.
6.Remove door stop. Move to opposite side of refrigerator door as shown. See Graphic 5.
7.Position the refrigerator handle on the opposite side of the refrigerator door. Drive the two top screws. Then, align the lower portion of handle and drive the bottom screw. See Graphic
8.Tighten all screws.
9.Replace the screw cover. Depending on your model, see Graphic
10.Set aside the refrigerator door until the bottom hinge is installed on the product.
Contour Door
Graphics are included later in this section.
Door Handle | |
Handle Screw | Screw Hole Plug |
Cabinet
1.Remove ⁵⁄₁₆"
2.Remove cabinet hinge hole plugs from the cabinet top and move them to opposite side hinge holes as shown in Graphic
Doors
1.Remove door hinge hole plug from top of freezer door. Move to opposite side as shown in Graphic 2.
2.Remove door stop from both the freezer and refrigerator door. See Graphic 3.
NOTE: When reversing the door, the freezer handle becomes the refrigerator door handle and the refrigerator door handle becomes the freezer handle. See Door Handle Reversal graphic.
3.Remove freezer handle assembly as shown. Keep all parts together. See Graphic 4.
4.Remove refrigerator handle assembly as shown. Keep all parts together. See Graphic 5.
5.Rotate and position handle from refrigerator door onto freezer door and assemble as shown in Graphic 6.
6.Rotate and position handle from freezer door onto refrigerator door and assemble as shown in Graphic 7.
7.Reinstall door stops to opposite side. See Graphic 8.
Replace Doors and Hinges
NOTE: Graphic may be reversed if door swing is reversed.
1.Replace the parts for the bottom hinge as shown and tighten screws. See Bottom Hinge graphic. Replace the refrigerator door.
NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.
2.Assemble the parts for the center hinge as shown and tighten all screws. See Center Hinge graphic. Replace the freezer door.
3.Assemble the parts for the top hinge as shown in Top Hinge graphic. Do not tighten screws completely.
4.Line up the doors so that the bottom of the freezer door aligns evenly with the top of the refrigerator door. Tighten all screws.
Final Steps
1.Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover. See Top Hinge graphic.
NOTE: On the
2.Replace the base grille. See Base Grille graphic.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
3.Plug into a grounded 3 prong outlet.
4.Return all removable door parts to the doors and food to the product.
6
