KitchenAid KUDK01TK, KUDL01TK manual Status Indicators, Wash System

Models: KUDL01TK KUDK01TK

1 36
Download 36 pages 40.3 Kb
Page 12
Image 12

Hi-Temp Scrub

Select this option to heat the water during parts of the cycle, and add a rinse. Higher water temperatures and an extra rinse helps clean tough soil. Hi-Temp Scrub, with the Heavy cycle, heats the water in the main wash and the prewash. Hi-Temp Scrub, with the Normal cycle, raises the water temperature in the main wash.

This option adds heat, water and wash time to the cycle.

NOTE: Hi-Temp Scrub is an option with the Heavy and Normal cycles.

ENERGY SAVER™ Dry System

Select this option to dry dishes without heat and save energy. ENERGY SAVER™ Dry System is useful when loads contain plastic dinnerware that may be sensitive to high temperatures.

The dishes take longer to dry and some spotting can occur. For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying.

NOTE: Rinse Only automatically uses this option. ENERGY SAVER™ Dry System is an option with all other cycles.

To delay the start

1.Close the door.

2.Select a wash cycle and options.

Press DELAY HOURS 1 time for a 2-hour delay, 2 times for a 4-hour delay, or 3 times for an 8-hour delay start.

2 4 8

The number glows above Delay Hours. The dishwasher starts the cycle in the selected number of hours.

3.Press START.

NOTE: To cancel the delay, press DELAY HOURS until no number is lit.

IMPORTANT:

Operate your dishwasher only when you are at home.

If your home is equipped with a water softener, do not start the dishwasher during the regeneration of the softener.

Status Indicators

Follow the progress of your dishwasher with the Status indicators.

Control Lock

Use Control Lock to prevent unintended use of the dishwasher. You can also use the Control Lock feature to prevent unintended cycle or option changes during a cycle.

Water Heating

WATER HEATING glows, and the cycle progression pauses, whenever water is heated during a cycle. Wash or rinse action continues as the water heats.

When CONTROL LOCK is lit, all buttons are disabled.

NOTES:

The dishwasher door can be opened while the controls are locked.

You can turn on the Lock while the dishwasher is running.

To turn on the Lock

Press and hold

for 4 seconds. CONTROL LOCK glows.

If you press any pad while your dishwasher is locked, the light flashes 3 times.

To turn off the Lock

Press and hold ENERGY SAVER™ Dry control for 4 seconds. The light turns off.

Delay Hours

Select this option to run your dishwasher at a later time or during off-peak hours.

Clean

CLEAN glows when a cycle is finished. The light turns off when you open the door or press Cancel/Drain.

Wash System

The five-level wash system provides excellent cleaning results. Four levels of filtration, and a soil collector system, filter the wash water and prevent food particles from redepositing on the clean dishes.

The wash water continuously flows through the Ultra-Fine filter, trapping food particles.

Two water jets, located under the spray arm remove the food particles from the Ultra-Fine filter.

A coarse strainer prevents bones, pits, and other large objects from entering the pump system.

NOTE: Periodically check the coarse strainer and remove any objects on the strainer.

12

Page 12
Image 12
KitchenAid KUDK01TK, KUDL01TK manual Status Indicators, Wash System