KitchenAid KUDL01TK Canceling a Cycle, Changing a Cycle or Setting, Adding Items During a Cycle

Models: KUDL01TK KUDK01TK

1 36
Download 36 pages 40.3 Kb
Page 11
Image 11

 

 

Use this cycle for pre-

 

 

 

 

 

 

rinsed and lightly-soiled

 

 

 

 

 

 

loads. During the

 

 

 

 

 

 

heated dry, the heating

Use the main wash

 

 

element cycles on and

 

 

detergent dispenser

 

 

off.

 

 

 

 

 

 

section.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-

Rinse

Main

Purge†

Final

Dry

Time

 

Water

Wash

 

Wash

 

Heated

 

(min)

 

Usage

 

 

 

 

Rinse

 

 

 

(gal/L)

 

 

 

 

 

 

 

 

 

 

71*

 

5.5/21

 

 

120°F

 

135°F

cycled

 

 

 

 

 

(49°C)

 

(57°C)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use this rinse cycle for

 

 

 

 

 

 

 

 

 

 

 

 

rinsing dishes, glasses,

 

 

 

 

 

 

and silverware that will

 

 

 

 

 

 

not be washed right

Do not use detergent

 

 

away.

 

 

 

 

 

 

with this cycle.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-

Rinse

Main

Rinse

Final

Dry

Time

 

Water

Wash

 

Wash

 

Heated

 

(min)

 

Usage

 

 

 

 

Rinse

 

 

 

(gal/L)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

 

1.8/7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A small amount of water is run through the pump to remove soil particles between the main wash and final rinse.

Canceling a Cycle

Anytime during a cycle, press

CANCEL/DRAIN glows. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely. The light goes off when the dishwasher finishes the drain.

To stop the drain

You can press Cancel/Drain again to stop the drain immediately. Remember to drain the dishwasher before starting a new cycle.

To clear the indicators

Press Cancel/Drain before starting the dishwasher to clear all options and cycles.

Changing a Cycle or Setting

During the first minute of a cycle

Press a new cycle and/or options.

After the first minute of a cycle

1.Press

CANCEL/DRAIN glows. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely.

2.Check the detergent dispensers. If the main wash cup has opened and the detergent washed away, refill the cups as needed.

3.Close the door.

4.Press a new cycle and/or options.

5.Press START.

Adding Items During a Cycle

You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser. If the cover is still closed, you can add items.

To add items

1.Lift up the door latch to stop the cycle. Wait for the spraying action to stop before opening the door.

2.Open the door. If the detergent dispenser cover is still closed, add the item.

3.Close the door firmly until it latches. The dishwasher resumes the cycle after about a 5-second pause.

Option Selections

You can customize your cycles by pressing an option. If you change your mind, press the option again to turn the option off. Select a different option if desired.

You can change an option anytime before the selected option begins. For example, you can press an unheated drying option any time before drying begins.

Press START to repeat the same cycle and options as the previous wash cycle.

NOTE: If the last cycle you completed was a rinse cycle, when you press Start, the dishwasher runs the last full wash cycle and options.

11

Page 11
Image 11
KitchenAid KUDL01TK manual Canceling a Cycle, Changing a Cycle or Setting, Adding Items During a Cycle, Option Selections