KitchenAid KUDS01VM Loading Bottom Rack, To adjust the back half, SURE-HOLD light item clips

Models: KUDS01VM

1 44
Download 44 pages 44.96 Kb
Page 8
Image 8
To adjust the back half

To adjust the back half

1.Grasp the tip of the tine that is in the tine holder.

2.Gently push the tine out of the holder.

3.Lay the tines down, toward the center of the rack.

SURE-HOLD®light item clips

The light item clips hold lightweight plastic items such as cups, lids, or bowls in place during washing.

To move a clip

1.Pull the clip up and off the tine.

2.Reposition the clip on another tine.

Adjustable 2-position top rack

You can raise or lower the top rack to fit tall items in either the top or bottom rack. Raise the top rack to accommodate items up to 9 in. (22 cm) in the top rack and 13 in. (33 cm) in the bottom rack, or lower the top rack to accommodate items up to 11 in. (28 cm) in both the top and bottom racks. Adjusters are located on each side of the top rack.

To raise the top rack

Lift the rack on either, or both, sides until the rack is level.

NOTE: The top rack adjusters MUST be level.

To lower the top rack

Press both rack adjusters and slide the rack back to its original position.

Removable Top Rack

The removable top rack allows you to wash larger items such as stock pots, roasters, and cookie sheets in the bottom rack.

IMPORTANT: Remove dishes prior to removing upper rack from dishwasher.

To remove the top rack

1.Pull the rack forward slightly to access track stops.

2.To release, press the button of the track stop finger grip and, pull track stop out of the track.

3.After removing both track stops, pull rack out.

To replace the top rack

1.Place the rollers on each side of the rack into the rack tracks and push the rack back.

2.While pushing the button in the center of the track stop finger grip, insert track stop into rack and slide until it locks into place. Release the button.

3.Pull on the track stop to make sure it is locked into place.

4.Repeat on the other side.

Loading Bottom Rack

The bottom rack is designed for plates, pans, casseroles, and utensils. Many items, up to 13 in. (33 cm) tall, fit in the bottom rack. (See recommended loading patterns shown.)

NOTE: The features on your dishwasher rack may vary from the drawings shown.

10 place setting

12 place setting

Do not load glasses, cups, or plastic items in the bottom rack. Load small items in the bottom rack only if they are secured in place.

Load plates, soup bowls, etc., between tines.

Overlap the edges of plates for large loads.

Load soup, cereal, and serving bowls in the rack in a variety of ways depending upon their size and shape. Load bowls securely between the rows of tines. Do not nest bowls because the spray will not reach all surfaces.

8

Page 8
Image 8
KitchenAid KUDS01VM manual Loading Bottom Rack, To adjust the back half, SURE-HOLD light item clips, To move a clip