KitchenAid KUDU03FT Removable mid level rack inserts, To remove inserts, To install rack inserts

•PlacecupsandglassesintherowsbetweentinesPlacing.

themoverthetinescanleadtobreakageandwaterspots.

Cup and g_ssload

China, crystal, and other delicate items must not touch each other during dishwasher operation. Damage may occur.

Load plastic items in the mid level rack only. Only plastic items marked "dishwasher safe" are recommended.

Load plastic items so the force of the spray does not move them during the cycle.

To avoid chipping, do not let stemware touch other items.

Small bowls, pans, and other utensils can be placed in the mid level rack. Load bowls in the center section for best

stability.

Removable mid level rack inserts

Your dishwasher is shipped with 2 removable mid level rack inserts. (See illustration below.) The removable rack inserts allow you to adjust the rack for the type of load you are washing. This is useful when washing a variety of glassware and dishes.

...............B

A. Removable rack inserts

B. Insert holding clips

To remove inserts

1.Lift up on the insert wire located toward the center of the rack to release the insert from the holding clips.

A. Lift removable insert wire to remove from holding clips. B, Holding clips

2.Lift insert out of rack.

To install rack inserts

1.Place the insert end legs under the front or back rack wire as shown below.

A. Insert legs

2.Push down on the center insert wire until it slides into the

holding clip on either side of the center in the bottom of the rack.

A. Insert holding clips