![](/images/new-backgrounds/1012237/1223729x1.webp)
Select this option to heat the water during parts of the cycle, and add a rinse. Higher water temperatures and an extra rinse help clean tough soils.
This option adds heat, water, and wash time to a cycle.
NOTE:
Sani Rinse
Select this option to raise the water temperature in the final rinse to approximately 155°F (68°C). The Sani Rinse option adds heat and time to the cycle. This high temperature rinse sanitizes your
dishes and glassware in accordance with NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments.
NOTE: The Heavy Duty cycle automatically uses this option. Sani Rinse is an option with the Normal cycle. Only these sanitization cycles have been designed to meet the NSF/ANSl requirements.
Heat Dry
The Heat Dry option in combination with rinse aid will give you excellent drying results. The energy to use Heat Dry costs pennies per cycle. Heat Dry is on when the light is lit on the Heat Dry button. Be sure to load plastic items in the upper rack to avoid damage.
You may turn off the Heat Dry option by pressing HEAT DRY so that the light goes off. However, you will have items in your dish load that will not be dry at the end of the cycle.
NOTE: The Heat Dry option is used in all cycles except Rinse Only.
Control Lock
Use control lock to avoid unintended use of your dishwasher. You can also use the control lock feature to avoid unintended cycle or option changes during a cycle.
When Control Lock is lit, all buttons are disabled.
NOTES:
•The dishwasher door can be opened while the controls are locked.
•You can turn on the lock while the dishwasher is running.
To turn on the lock
Press and hold HEAT DRY for at least 4 seconds. The Control Lock light glows.
If you press any pad while your dishwasher is locked, the light flashes 3 times.
To turn off the lock
Press and hold HEAT DRY for at least 4 seconds. The Control Lock light turns off.
4 Hour Delay
Select this option to run your dishwasher at a later time or during
To delay the start (Model KUDU03ST)
1.Open the door.
2.Select a wash cycle and options. The selected cycle and option lights will glow.
3.Press 4 HOUR DELAY. You will see
showing in the display. The 4 Hour Delay light will glow.
4.Press START/RESUME. The Start/Resume light will glow.
5.Close the door firmly.
NOTE: To cancel the delay, open the door and press 4 HOUR
DELAY. To immediately start your dishwasher, press START/ RESUME.
To delay the start (all other models)
1.Open the door.
2.Select a wash cycle and options. The selected cycle and option lights will glow.
3.Press 4 HOUR DELAY. The 4 Hour Delay light will glow.
4.Press START/RESUME.
5.Close the door firmly within 3 seconds of pressing Start/ Resume.
NOTE: To cancel the delay, open the door and press 4 HOUR DELAY. To immediately start your dishwasher, press START/ RESUME and close the door firmly within 3 seconds.
Sanitized
If you select the Sani Rinse option, Sanitized light glows when the Sani Rinse cycle is finished. If your dishwasher did not properly sanitize your dishes, the light flashes at the end of the cycle. This can happen if the cycle is interrupted. The light goes off when you
open and close the door or press CANCEL.
Clean
The Clean light glows when a cycle is finished. The light turns off when you open and close the door or press CANCEL.
15