![](/images/new-backgrounds/1319271/319271217x1.webp)
To set the port status detection timer:
Step |
| Command | Remarks |
1. | Enter system view. | N/A | |
|
|
|
|
2. | Set the port status detection | By default, the port status detection | |
| timer. | timer is 30 seconds. | |
|
| ||
|
|
|
|
Configuring temperature thresholds for a device or a module
Configuring basic temperature thresholds
The following matrix shows the feature and hardware compatibility:
Hardware | Feature compatible | |
No | ||
|
| |
Yes | ||
|
| |
F5000 | Yes | |
|
| |
Firewall module | 12500/10500 Enhanced FW: No | |
Others: Yes | ||
| ||
|
| |
No | ||
|
| |
Yes | ||
|
|
You can set the temperature threshold to monitor the temperature of a device or a module. When the temperature reaches the threshold, the device generates alarms.
To configure basic temperature thresholds:
Step |
| Command | Remarks |
1. | Enter system view. | N/A | |
|
|
|
|
2. | Configure the basic | By default, the lower threshold is | |
| temperature thresholds for a | 0°C (32°F), and the upper | |
|
| ||
| device or a module. | threshold is 50°C (122°F). | |
|
| ||
|
|
|
|
Configuring advanced temperature thresholds
The following matrix shows the feature and hardware compatibility:
Hardware | Feature compatible |
Yes | |
|
|
No | |
|
|
F5000 | No |
|
|
| 103 |